Oil and gas jobs in Qatar at UNISIS Engineering Company for more than 120 job opportunities in various departments and primary fields, please apply first. Apply now وظائف النفط والغاز في قطر لدي شركة UNISIS الهندسية لاكثر من 120 فرصة عمل بمختلف الاقسام و المجالات الاولية باسبقة التقديم . قدم الان

 

Oil and gas jobs in Qatar at UNISIS Engineering Company for more than 120 job opportunities in various departments and primary fields, please apply first. Apply now

  • Since our inception in UNISIS Engineering has emerged as the leading solutions provider to one of the best names in the industry. Our domain expertise and experience helped us stand out among our peers. We believe in long term relationship with our clients and focus on providing unparalleled services to our clients. Our dedication and commitment is what makes us the most sought after names in the industry and our value based services helped in bringing fruitful results to our customers.
  • We provide our services and solutions in Saudi Arabia, from the main office located in Al Khobar and Branch Offices/Operations in Jubail, Riyadh, Jeddah, Turaif, Yanbu and Jizan. We have own Offices in Bahrain, Kuwait and UAE and with affiliate offices in Europe, USA, Asia, Far Eastern Countries and South Africa to serve the client requirements.

↔️

1. AL Field Specialist

Job Description:
The Artificial Lift (AL) Field Specialist is responsible for overseeing the installation, maintenance, and troubleshooting of artificial lift systems used in oil and gas wells. This role requires hands-on expertise in various types of artificial lift technologies, such as ESP (Electric Submersible Pump), PCP (Progressive Cavity Pump), and rod lift systems. The specialist will work closely with field teams, providing technical guidance and ensuring that operations are performed safely and efficiently. They are also responsible for monitoring well performance, conducting routine inspections, and making adjustments to optimize production. Strong analytical skills and the ability to respond quickly to operational challenges are crucial in this role.

Responsibilities:

  • Install, maintain, and repair artificial lift systems on-site.
  • Conduct performance tests and ensure optimal operation of equipment.
  • Troubleshoot mechanical and electrical issues related to artificial lift systems.
  • Collaborate with clients and provide technical support and recommendations.
  • Maintain accurate records of field activities and performance reports.
  • Ensure compliance with health, safety, and environmental regulations.
  • Train and mentor junior field technicians.

Qualifications:

  • Bachelor's degree in Mechanical Engineering or related field preferred.
  • 3+ years of experience in artificial lift operations.
  • Strong problem-solving skills and attention to detail.

2. Artificial Lift Engineer

Job Description:
The Artificial Lift Engineer is responsible for designing, optimizing, and managing artificial lift systems to enhance oil and gas production. This role involves working closely with reservoir engineers and production teams to analyze well conditions and determine the best artificial lift solution. The engineer will also be responsible for selecting appropriate equipment, monitoring performance, and implementing necessary modifications to improve efficiency. They must stay updated on the latest advancements in artificial lift technologies and ensure that all operations adhere to industry standards and safety protocols.

Responsibilities:

  • Design and implement artificial lift systems tailored to specific well conditions.
  • Conduct performance analysis and optimize lift systems to maximize production.
  • Collaborate with cross-functional teams, including reservoir and production engineers.
  • Recommend equipment upgrades and modifications as needed.
  • Develop and maintain documentation related to lift system designs and performance.
  • Ensure compliance with industry standards and safety guidelines.
  • Provide technical support during field operations and troubleshoot issues.

Qualifications:

  • Bachelor's degree in Petroleum Engineering or a related field.
  • Minimum of 5 years of experience in artificial lift engineering.
  • Strong analytical skills and knowledge of various artificial lift technologies.

3. Artificial Lift Field Specialist

Job Description:
The Artificial Lift Field Specialist plays a crucial role in the installation, commissioning, and maintenance of artificial lift systems in oil and gas wells. They are responsible for ensuring the optimal performance of these systems by conducting field inspections, troubleshooting issues, and performing repairs when necessary. The specialist will collaborate with engineers and other field personnel to implement solutions that maximize production while minimizing downtime. In this role, strong technical expertise and the ability to work in challenging environments are essential.

Responsibilities:

  • Install, test, and commission artificial lift systems in the field.
  • Conduct routine maintenance and troubleshooting of lift equipment.
  • Analyze well performance data and recommend improvements.
  • Ensure proper documentation of field activities and maintenance records.
  • Collaborate with engineers to implement best practices and optimize system performance.
  • Provide technical training and support to field technicians.
  • Ensure adherence to safety protocols and industry standards during all operations.

Qualifications:

  • Bachelor’s degree in Mechanical or Electrical Engineering (preferred).
  • 3+ years of field experience with artificial lift systems.
  • Strong mechanical and electrical troubleshooting skills.
  • Ability to work in remote and challenging field environments.

4. Assembler

Job Description:
The Assembler is responsible for assembling mechanical and electrical components to build equipment or machinery used in the oil and gas industry. This role requires precision, attention to detail, and the ability to follow technical instructions and blueprints. Assemblers work closely with engineering and quality control teams to ensure that all components meet specifications and function correctly. They must also conduct quality checks and ensure that safety standards are maintained throughout the assembly process.

Responsibilities:

  • Assemble mechanical and electrical components according to technical specifications.
  • Read and interpret blueprints, schematics, and work instructions.
  • Inspect assembled parts for defects and ensure proper alignment and functionality.
  • Collaborate with quality control to address any issues or discrepancies.
  • Maintain a clean and organized workspace.
  • Adhere to safety protocols and company policies during assembly operations.
  • Document assembly processes and report any equipment malfunctions.

Qualifications:

  • High school diploma or equivalent.
  • Experience in mechanical or electrical assembly.
  • Ability to read technical drawings and schematics.
  • Strong attention to detail and manual dexterity.

5. Buyer/Planner

Job Description:
The Buyer/Planner is responsible for managing the procurement and inventory planning processes to ensure the availability of materials and supplies required for production. This role involves sourcing vendors, negotiating contracts, and maintaining optimal inventory levels to meet production schedules without overstocking or understocking. The Buyer/Planner works closely with suppliers, production teams, and warehouse staff to ensure timely delivery and cost-effective procurement. Analytical skills, attention to detail, and the ability to manage multiple tasks simultaneously are essential for success in this role.

Responsibilities:

  • Develop and execute procurement strategies to source materials and supplies.
  • Negotiate with suppliers to secure favorable terms and pricing.
  • Monitor inventory levels and adjust purchase orders to meet production demands.
  • Collaborate with production and warehouse teams to ensure timely material availability.
  • Analyze market trends and supplier performance to identify cost-saving opportunities.
  • Maintain accurate records of purchase orders, contracts, and supplier information.
  • Ensure compliance with company policies and industry regulations.

Qualifications:

  • Bachelor’s degree in Supply Chain Management, Business Administration, or a related field.
  • 3+ years of experience in procurement and inventory planning.
  • Proficiency in ERP systems and Microsoft Excel.
  • Strong negotiation and communication skills.

6. Chemical Engineer

Job Description:
The Chemical Engineer is responsible for designing, developing, and optimizing chemical processes and equipment used in the production of oil and gas. They work closely with production teams to improve efficiency, reduce costs, and ensure compliance with safety and environmental regulations. This role involves conducting research, analyzing data, and implementing process improvements to enhance product quality and operational performance. The Chemical Engineer must also stay updated on industry advancements and apply innovative solutions to complex challenges.

Responsibilities:

  • Design and optimize chemical processes for oil and gas production.
  • Conduct feasibility studies and risk assessments for new processes.
  • Monitor and troubleshoot production processes to ensure efficiency.
  • Collaborate with cross-functional teams to implement process improvements.
  • Ensure compliance with safety, health, and environmental regulations.
  • Analyze data and prepare technical reports for management.
  • Stay current with industry trends and emerging technologies.

Qualifications:

  • Bachelor’s degree in Chemical Engineering or a related field.
  • Minimum of 5 years of experience in chemical process design and optimization.
  • Proficiency in process simulation software.
  • Strong problem-solving and analytical skills.

7. Chemical Equipment Operator

Job Description:
The Chemical Equipment Operator is responsible for operating and monitoring machinery and equipment used in chemical processing within the oil and gas industry. This role requires careful attention to safety procedures, as operators handle hazardous materials and ensure that processes run smoothly and efficiently. Operators must perform regular inspections, adjust controls, and document production data to maintain consistent product quality. They also collaborate with maintenance teams to resolve any mechanical issues that may arise during operations.

Responsibilities:

  • Operate and monitor chemical processing equipment and machinery.
  • Follow safety protocols for handling hazardous materials and chemicals.
  • Perform routine inspections and maintenance of equipment.
  • Adjust machine settings to optimize production efficiency.
  • Record and maintain detailed production logs and data reports.
  • Identify and troubleshoot equipment malfunctions.
  • Collaborate with maintenance teams to ensure minimal downtime.
  • Maintain a clean and safe work environment.

Qualifications:

  • High school diploma or equivalent; technical certification is a plus.
  • 2+ years of experience operating chemical processing equipment.
  • Knowledge of safety regulations and handling hazardous materials.
  • Strong mechanical aptitude and problem-solving skills.

8. Choke Rapid Response Engineer

Job Description:
The Choke Rapid Response Engineer is responsible for providing immediate technical support and solutions to issues related to choke valves and flow control systems in oil and gas operations. This role involves responding to field emergencies, troubleshooting equipment malfunctions, and implementing corrective actions to minimize production downtime. The engineer will also collaborate with clients, field teams, and maintenance crews to ensure optimal performance of flow control systems. Strong analytical skills, quick decision-making, and a deep understanding of flow dynamics are essential for success in this role.

Responsibilities:

  • Respond to field emergencies involving choke valves and flow control systems.
  • Diagnose and troubleshoot equipment failures and malfunctions.
  • Implement corrective actions to restore system functionality.
  • Collaborate with field teams and clients to provide technical support.
  • Conduct performance tests and ensure proper calibration of flow control equipment.
  • Maintain detailed records of incidents and corrective measures taken.
  • Ensure compliance with safety and operational standards.
  • Provide recommendations for system improvements and upgrades.

Qualifications:

  • Bachelor’s degree in Mechanical Engineering, Petroleum Engineering, or a related field.
  • 4+ years of experience in flow control systems and choke valves.
  • Strong problem-solving and analytical skills.
  • Ability to work under pressure and respond quickly to emergencies.

9. CNC Machinist

Job Description:
The CNC Machinist is responsible for operating and programming CNC (Computer Numerical Control) machines to produce precision parts and components used in the oil and gas industry. This role requires expertise in interpreting blueprints, setting up machines, and performing quality checks to ensure that finished products meet exact specifications. The CNC Machinist must also maintain and troubleshoot equipment to ensure efficient operation and minimal downtime.

Responsibilities:

  • Program, set up, and operate CNC machines to produce precision parts.
  • Read and interpret blueprints and technical drawings.
  • Perform quality inspections to ensure parts meet specifications.
  • Adjust machine settings to optimize performance and output.
  • Maintain and troubleshoot CNC equipment as needed.
  • Document production activities and maintain accurate records.
  • Ensure adherence to safety protocols and company standards.

Qualifications:

  • High school diploma or equivalent; technical certification in CNC machining is preferred.
  • 3+ years of experience operating CNC machines.
  • Proficiency in reading blueprints and using precision measurement tools.
  • Strong mechanical skills and attention to detail.

10. CNC Operator

Job Description:
The CNC Operator is responsible for operating and maintaining CNC (Computer Numerical Control) machines to manufacture precision parts and components used in various industrial applications. This role requires a strong understanding of machine operation, the ability to interpret technical blueprints, and attention to detail to ensure that the products meet quality standards. The CNC Operator will also be responsible for routine maintenance of the machines and ensuring that all safety protocols are followed.

Responsibilities:

  • Operate and monitor CNC machines to produce precision components.
  • Interpret and follow technical blueprints, schematics, and work orders.
  • Adjust machine settings and perform tool changes as required.
  • Inspect finished products to ensure they meet quality specifications.
  • Maintain equipment by performing routine maintenance and troubleshooting issues.
  • Document production activities and maintain accurate records.
  • Ensure compliance with safety regulations and company standards.

Qualifications:

  • High school diploma or equivalent; technical certification in CNC operation is preferred.
  • 2+ years of experience operating CNC machines.
  • Proficiency in reading and interpreting technical blueprints.
  • Strong attention to detail and mechanical aptitude.




11. COI Manufacturing Engineer

Job Description:
The COI (Center of Innovation) Manufacturing Engineer is responsible for designing, developing, and optimizing manufacturing processes to improve productivity, efficiency, and product quality. This role involves analyzing production workflows, implementing new technologies, and collaborating with cross-functional teams to address operational challenges. The Manufacturing Engineer will also ensure that all manufacturing processes adhere to safety and quality standards.

Responsibilities:

  • Design and implement manufacturing processes to improve efficiency and quality.
  • Analyze production workflows and identify areas for improvement.
  • Collaborate with design, quality, and production teams to optimize manufacturing operations.
  • Implement new technologies and automation solutions.
  • Develop and maintain documentation for manufacturing processes.
  • Ensure compliance with safety and quality standards.
  • Provide technical support and training to production staff.

Qualifications:

  • Bachelor’s degree in Mechanical, Industrial, or Manufacturing Engineering.
  • 3+ years of experience in manufacturing engineering.
  • Strong problem-solving and analytical skills.
  • Proficiency in CAD software and manufacturing process simulation.

12. Completions Field Engineer

Job Description:
The Completions Field Engineer is responsible for overseeing and managing well completion operations in the oil and gas industry. This includes designing and implementing completion strategies, coordinating with field teams, and ensuring that all operations are conducted safely and efficiently. The Field Engineer will also monitor well performance, troubleshoot issues, and provide technical support to optimize production.

Responsibilities:

  • Design and implement well completion plans.
  • Coordinate field operations and manage on-site teams.
  • Monitor well performance and make adjustments to optimize production.
  • Troubleshoot issues and provide technical support to field personnel.
  • Ensure compliance with safety and environmental regulations.
  • Prepare and maintain detailed reports on completion activities.
  • Collaborate with clients and other stakeholders to achieve project goals.

Qualifications:

  • Bachelor’s degree in Petroleum Engineering or a related field.
  • 4+ years of experience in well completions.
  • Strong knowledge of completion techniques and tools.
  • Excellent problem-solving and communication skills.

13. Controls Electrical Engineer

Job Description:
The Controls Electrical Engineer is responsible for designing, developing, and implementing electrical control systems for industrial machinery and processes. This role involves creating schematics, programming control systems, and ensuring the smooth operation of equipment through troubleshooting and maintenance. The engineer will also work closely with other departments to integrate control systems with mechanical and software components, ensuring optimal performance and safety.

Responsibilities:

  • Design and develop electrical control systems for industrial machinery.
  • Create and interpret electrical schematics and technical drawings.
  • Program PLCs (Programmable Logic Controllers) and other control systems.
  • Perform system testing, troubleshooting, and maintenance.
  • Collaborate with mechanical and software teams to integrate control systems.
  • Ensure compliance with safety and industry standards.
  • Document system designs, updates, and maintenance activities.

Qualifications:

  • Bachelor’s degree in Electrical Engineering or related field.
  • 3+ years of experience in control systems engineering.
  • Proficiency in PLC programming and control system design.
  • Strong problem-solving and analytical skills.

14. Controls Systems Engineer

Job Description:
The Controls Systems Engineer is responsible for designing and optimizing control systems that manage and automate industrial processes. This role requires working closely with software developers, electrical engineers, and field technicians to ensure seamless integration of hardware and software components. The engineer will be involved in the entire lifecycle of control systems, from concept and design to implementation, testing, and maintenance.

Responsibilities:

  • Design, develop, and implement control systems for industrial automation.
  • Collaborate with cross-functional teams to ensure system integration.
  • Test and debug control systems to ensure proper functionality.
  • Optimize control systems for efficiency and reliability.
  • Prepare documentation and user manuals for control systems.
  • Provide technical support and training to end-users.
  • Ensure compliance with industry standards and safety regulations.

Qualifications:

  • Bachelor’s degree in Control Systems Engineering, Electrical Engineering, or a related field.
  • 3+ years of experience in control systems design and implementation.
  • Proficiency in PLC, SCADA, and HMI programming.
  • Strong analytical and problem-solving skills.

15. Crusher System Operator

Job Description:
The Crusher System Operator is responsible for operating and maintaining crushing systems used in mining and industrial operations. This role involves monitoring equipment performance, making adjustments to optimize efficiency, and performing routine maintenance to prevent downtime. The operator must also ensure compliance with safety standards and environmental regulations while maintaining accurate production records.

Responsibilities:

  • Operate and monitor crushing equipment to ensure optimal performance.
  • Adjust settings to maximize throughput and efficiency.
  • Perform routine maintenance and troubleshoot equipment issues.
  • Maintain accurate production and maintenance records.
  • Ensure compliance with safety and environmental regulations.
  • Collaborate with maintenance teams for equipment repairs and upgrades.
  • Conduct inspections to identify potential equipment failures.

Qualifications:

  • High school diploma or equivalent; technical certification is a plus.
  • 2+ years of experience operating crushing systems.
  • Knowledge of mechanical systems and equipment maintenance.
  • Strong attention to safety and detail.


16. DESIGNER / JUNIOR ENGINEER

Job Description:
The Designer / Junior Engineer is responsible for assisting in the design and development of mechanical, electrical, or structural components used in industrial applications. This role involves creating detailed technical drawings, supporting senior engineers in project execution, and ensuring designs meet client specifications and industry standards. The Designer / Junior Engineer will also collaborate with cross-functional teams to ensure that projects are completed on time and within budget.

Responsibilities:

  • Assist in the design and development of components and systems.
  • Create detailed technical drawings and schematics using CAD software.
  • Support senior engineers in project planning and execution.
  • Conduct basic simulations and tests to validate designs.
  • Ensure designs comply with industry standards and client requirements.
  • Collaborate with manufacturing teams to ensure design feasibility.
  • Maintain project documentation and update design revisions.

Qualifications:

  • Bachelor’s degree in Engineering (Mechanical, Electrical, or related field).
  • Proficiency in CAD software (AutoCAD, SolidWorks, etc.).
  • 1-2 years of experience in design or engineering roles (internships included).
  • Strong problem-solving and analytical skills.




17. Electrical Engineer

Job Description:
The Electrical Engineer is responsible for designing, developing, and maintaining electrical systems and components used in industrial and commercial applications. This role involves performing electrical calculations, creating detailed schematics, and ensuring that systems comply with safety and regulatory standards. The Electrical Engineer will also work closely with other departments to troubleshoot issues and implement system improvements.

Responsibilities:

  • Design and develop electrical systems and components.
  • Perform electrical calculations and simulations.
  • Create and interpret electrical schematics and technical drawings.
  • Ensure systems meet safety and industry standards.
  • Troubleshoot and resolve electrical system issues.
  • Collaborate with other departments to improve system performance.
  • Document system designs, updates, and maintenance activities.

Qualifications:

  • Bachelor’s degree in Electrical Engineering.
  • 3+ years of experience in electrical system design.
  • Proficiency in CAD and electrical simulation software.
  • Strong analytical and problem-solving skills.

18. Electronic CAD Designer

Job Description:
The Electronic CAD Designer is responsible for creating and updating electronic schematics and PCB layouts using CAD software. This role involves working closely with engineers to translate design concepts into detailed drawings and ensuring that all designs meet industry standards and manufacturing requirements. The designer must also perform design reviews and implement necessary modifications.

Responsibilities:

  • Create electronic schematics and PCB layouts using CAD tools.
  • Collaborate with engineers to develop detailed electronic designs.
  • Ensure designs meet industry standards and manufacturing specifications.
  • Perform design reviews and implement necessary changes.
  • Maintain and update design documentation.
  • Support the manufacturing team during the production process.
  • Troubleshoot design-related issues and provide solutions.

Qualifications:

  • Diploma or bachelor’s degree in Electronics Engineering or related field.
  • Proficiency in CAD tools for PCB design (e.g., Altium, Eagle).
  • 2+ years of experience in electronic design.
  • Strong attention to detail and analytical skills.

19. Electronics Technician

Job Description:
The Electronics Technician is responsible for installing, maintaining, and repairing electronic equipment used in industrial, commercial, or manufacturing settings. This role requires hands-on experience with electronic components, circuit boards, and testing equipment. The technician will diagnose malfunctions, replace defective parts, and ensure that all electronic systems operate efficiently and safely. They will also collaborate with engineers to implement upgrades and improvements to electronic systems.

Responsibilities:

  • Install, maintain, and repair electronic equipment and systems.
  • Diagnose and troubleshoot issues in circuit boards and electronic components.
  • Perform routine maintenance and testing to ensure optimal performance.
  • Replace or repair defective components and parts.
  • Collaborate with engineers to implement system upgrades and improvements.
  • Maintain accurate records of maintenance and repair activities.
  • Ensure compliance with safety regulations and industry standards.

Qualifications:

  • Diploma or associate degree in Electronics Technology or a related field.
  • 3+ years of experience as an electronics technician.
  • Proficiency in using diagnostic and testing equipment.
  • Strong problem-solving skills and attention to detail.



20. Embedded Software Engineer - Fresh Out

Job Description:
The Embedded Software Engineer (Fresh Graduate) is responsible for developing and testing software that runs on embedded systems used in various electronic devices. This entry-level role provides an opportunity to work with experienced engineers to design, code, and debug software that interfaces directly with hardware components. The engineer will also participate in system testing, performance optimization, and documentation of software solutions.

Responsibilities:

  • Develop and test embedded software for electronic devices.
  • Write, debug, and optimize code in C/C++ or other embedded programming languages.
  • Collaborate with hardware engineers to ensure seamless integration between software and hardware.
  • Conduct system-level testing and troubleshoot software issues.
  • Optimize software performance for speed and reliability.
  • Document software designs, test cases, and user manuals.
  • Stay updated with the latest advancements in embedded systems and technologies.

Qualifications:

  • Bachelor’s degree in Computer Engineering, Electrical Engineering, or related field.
  • Fresh graduate with internship or project experience in embedded systems.
  • Proficiency in C/C++ programming for embedded systems.
  • Basic understanding of microcontrollers, RTOS, and hardware interfaces.
  • Strong problem-solving and analytical skills.
21. Engineering & Geosciences Internship
22. Environmental Solutions Specialist
23. Equipment Operator
24. Field Data Analyst - Geoservices
25. Field Engineer
26. Field Engineer Trainee


27. HSE Coordinator
28. Field Service Specialist
29. Field Service Specialist
30. Field Specialist Trainee
31. Field Specialist/Supervisor – Coiled Tubing
32. Field Specialists
33. Field Specialists Directional


34. Field Specialists Trainee - Diploma Graduates
35. Fitter Machinist
36. Flowback Operator
37. Flowback Specialist
38. Geologist
39. Geomechanics Engineer
40. Geosolutions Geophysicist
41. GSS Data Analyst
42. GSS Mud Logging Analyst


43. Heavy Equipment Operator
44. Industrial IOT Engineer
45. Inspector
46. Process Engineer
47. QHSE Specialist
48. Machinist
49. Maintenance Assistant
50. Maintenance Mechanic


51. Maintenance Mechanical and Electrical/Electronics Technician Trainees
52. Maintenance Technician
53. Manufacturing Engineer
54. Manufacturing Planner
55. Master Scheduler
56. Production Planning
57. Material Handler
58. Mechanical Engineer
59. Mechanical Rotating Engineer


60. Mechanical Static & Vessel Engineer
61. Mechanical Technician
62. Mechanical Technician (Diesel Heavy Vehicle Mechanic)
63. MPD/UBD Supervisor
64. Mud Logging Analyst - GeoServices
65. MWD Specialist
66. Operator
67. OSS Manifold Engineer
68. OSS Services Engineer


69. OSS Systems Engineer Senior
70. Piping Designer
71. Planner/Scheduler
72. Plant Operator
73. Process Engineer
74. Production Engineer
75. Production Maintenance
76. Technician
77. Production Planner
78. Production Team Lead
79. Machinist Team Leader


80. Project Quality Engineer
81. QC Inspector
82. Quality Engineer
83. Quality Inspector
84. Reservoir Engineer
85. Senior Flow Assurance Engineer
86. Senior Process Engineer
87. Senior Reliability Engineer
88. Senior Vessel Designer
89. Slickline Field Specialist/Supervisor


90. Spooler Operator
91. Reservoir Engineer
92. Structural Engineer
93. Subsea Connector Engineer
94. Subsea Controls Field Specialist
95. Systems Engineer
96. Technical Support Specialist
97. Technician
98. Test Operator
99. Valve Technician (Fitter Machinist)


100. Well Placement Engineer
101. Well Site Leader
102. Wireline Field Engineer
103. Wireline Field Specialist/Engineer
104. Wireline Mechanic Technician
105. Rigger Level 3
106. Planner - Scheduler
107. Scaffolding Inspector
108. Heavy Equipment Inspector
109. Electrical Inspector
110. PTW Coordinator


111. QC Welding Supervisor
112. QC Electrical Supervisor
113. QC Building Inspector
114. QC RTR Piping Inspector
115. QC Steel Structure Inspector
116. QC Preservation Inspector (Static)
117. QC RT Film Interpreter
118. QC NDT Coordinator
119. QC Electrical Inspector
120. QC Coating/Insulation Inspector

Please share your updated resume -

 vjossy@unisisengineering.com  /  vjossy@unisisengineering.com

وظائف النفط والغاز في قطر لدي شركة UNISIS الهندسية لاكثر من 120 فرصة عمل بمختلف الاقسام و المجالات الاولية باسبقة التقديم . قدم الان 

1-أخصائي ميداني لأنظمة الرفع الاصطناعي

الوصف الوظيفي:
يُشرف أخصائي الميدان لأنظمة الرفع الاصطناعي على تركيب وصيانة وإصلاح أنظمة الرفع الاصطناعي المستخدمة في آبار النفط والغاز. يتطلب هذا الدور خبرة عملية في تقنيات الرفع الاصطناعي المختلفة مثل المضخات الغاطسة الكهربائية (ESP)، ومضخات التجويف التقدمي (PCP)، وأنظمة رفع القضبان. يعمل الأخصائي بشكل وثيق مع فرق العمل الميداني لتقديم التوجيه الفني وضمان تنفيذ العمليات بأمان وكفاءة. كما يُسند إليه مراقبة أداء الآبار، وإجراء الفحوصات الروتينية، وإجراء التعديلات لتحسين الإنتاج.

المسؤوليات:

  • تركيب وصيانة وإصلاح أنظمة الرفع الاصطناعي في الموقع.
  • إجراء اختبارات الأداء لضمان التشغيل الأمثل للمعدات.
  • معالجة المشكلات الميكانيكية والكهربائية المتعلقة بأنظمة الرفع الاصطناعي.
  • التعاون مع العملاء لتقديم الدعم الفني والتوصيات.
  • الاحتفاظ بسجلات دقيقة للأنشطة الميدانية وتقارير الأداء.
  • ضمان الالتزام بلوائح الصحة والسلامة والبيئة.
  • تدريب وإرشاد الفنيين الميدانيين المبتدئين.

المؤهلات:

  • درجة البكالوريوس في الهندسة الميكانيكية أو مجال ذي صلة (يفضل).
  • خبرة 3 سنوات على الأقل في عمليات الرفع الاصطناعي.
  • مهارات قوية في حل المشكلات والانتباه إلى التفاصيل.

2- أخصائي ميداني في أنظمة الرفع الاصطناعي

الوصف الوظيفي:
يقوم أخصائي الميدان في أنظمة الرفع الاصطناعي بتركيب وتشغيل وصيانة أنظمة الرفع الاصطناعي في آبار النفط والغاز. يتولى مسؤولية ضمان الأداء الأمثل لهذه الأنظمة من خلال إجراء الفحوصات الميدانية، وحل المشكلات، وإجراء الإصلاحات عند الحاجة. يعمل الأخصائي بالتعاون مع المهندسين وفرق العمل الميدانية لتنفيذ حلول تزيد من الإنتاج وتقلل من فترات التوقف.

المسؤوليات:

  • تركيب واختبار وتشغيل أنظمة الرفع الاصطناعي في الموقع.
  • إجراء الصيانة الدورية وحل مشكلات المعدات.
  • تحليل بيانات أداء الآبار وتقديم توصيات لتحسين الأداء.
  • توثيق الأنشطة الميدانية وسجلات الصيانة.
  • التعاون مع المهندسين لتطبيق أفضل الممارسات وتحسين كفاءة الأنظمة.
  • تقديم التدريب والدعم الفني للفنيين الميدانيين.
  • ضمان الالتزام بمعايير السلامة والإجراءات الصناعية أثناء العمليات.

المؤهلات:

  • درجة البكالوريوس في الهندسة الميكانيكية أو الكهربائية (يفضل).
  • خبرة لا تقل عن 3 سنوات في العمل الميداني مع أنظمة الرفع الاصطناعي.
  • مهارات قوية في حل المشكلات الميكانيكية والكهربائية.
  • القدرة على العمل في بيئات ميدانية بعيدة وصعبة.

3- مهندس أنظمة الرفع الاصطناعي

الوصف الوظيفي:
يُكلّف مهندس أنظمة الرفع الاصطناعي بتصميم وتحسين وإدارة أنظمة الرفع الاصطناعي لتعزيز إنتاج النفط والغاز. يتطلب الدور العمل بشكل وثيق مع مهندسي الخزانات وفرق الإنتاج لتحليل ظروف الآبار وتحديد الحلول الأنسب للرفع الاصطناعي. يتحمل المهندس أيضًا مسؤولية اختيار المعدات المناسبة، ومراقبة الأداء، وإجراء التعديلات اللازمة لتحسين الكفاءة.

المسؤوليات:

  • تصميم وتنفيذ أنظمة الرفع الاصطناعي حسب ظروف الآبار.
  • إجراء تحليل الأداء لتحسين أنظمة الرفع وزيادة الإنتاج.
  • التعاون مع الفرق متعددة التخصصات، بما في ذلك مهندسي الخزانات والإنتاج.
  • التوصية بترقية المعدات وإجراء التعديلات حسب الحاجة.
  • إعداد الوثائق المتعلقة بتصاميم أنظمة الرفع وأدائها.
  • ضمان الالتزام بالمعايير الصناعية وإرشادات السلامة.
  • تقديم الدعم الفني أثناء العمليات الميدانية ومعالجة المشكلات.

المؤهلات:

  • درجة البكالوريوس في هندسة البترول أو مجال ذي صلة.
  • خبرة لا تقل عن 5 سنوات في هندسة أنظمة الرفع الاصطناعي.
  • مهارات تحليلية قوية ومعرفة بتقنيات الرفع الاصطناعي المختلفة.

4-فني تجميع

الوصف الوظيفي:
يتولى فني التجميع مسؤولية تجميع المكونات الميكانيكية والكهربائية لبناء المعدات أو الآلات المستخدمة في صناعة النفط والغاز. يتطلب هذا الدور الدقة والانتباه للتفاصيل والقدرة على اتباع التعليمات الفنية والمخططات. يعمل فني التجميع بشكل وثيق مع فرق الهندسة وضبط الجودة لضمان أن جميع المكونات تلبي المواصفات وتعمل بشكل صحيح.

المسؤوليات:

  • تجميع المكونات الميكانيكية والكهربائية وفقًا للمواصفات الفنية.
  • قراءة وتفسير المخططات والرسومات الهندسية والتعليمات.
  • فحص الأجزاء المجمعة للتأكد من خلوها من العيوب وضمان المحاذاة الصحيحة.
  • التعاون مع فريق الجودة لمعالجة أي مشاكل أو اختلافات.
  • الحفاظ على بيئة عمل نظيفة ومنظمة.
  • الالتزام ببروتوكولات السلامة وسياسات الشركة أثناء عمليات التجميع.
  • توثيق عمليات التجميع والإبلاغ عن أي أعطال في المعدات.

المؤهلات:

  • شهادة الثانوية العامة أو ما يعادلها.
  • خبرة في التجميع الميكانيكي أو الكهربائي.
  • القدرة على قراءة الرسومات الفنية والمخططات.
  • انتباه قوي للتفاصيل ومهارة يدوية عالية.

5-مخطط/مشتريات

الوصف الوظيفي:
يُكلف مخطط/مشتريات بإدارة عمليات التوريد وتخطيط المخزون لضمان توفر المواد والمستلزمات اللازمة للإنتاج. يشمل هذا الدور البحث عن الموردين، والتفاوض على العقود، والحفاظ على مستويات المخزون المثلى لتلبية جداول الإنتاج دون الإفراط أو النقص. يعمل المخطط/المشتريات بشكل وثيق مع الموردين وفرق الإنتاج والموظفين في المستودعات لضمان التسليم في الوقت المناسب والتوريد الفعال من حيث التكلفة.

المسؤوليات:

  • تطوير وتنفيذ استراتيجيات التوريد للحصول على المواد والمستلزمات.
  • التفاوض مع الموردين للحصول على شروط وأسعار مناسبة.
  • مراقبة مستويات المخزون وتعديل أوامر الشراء لتلبية متطلبات الإنتاج.
  • التعاون مع فرق الإنتاج والمستودعات لضمان توفر المواد في الوقت المناسب.
  • تحليل اتجاهات السوق وأداء الموردين لتحديد فرص خفض التكاليف.
  • الاحتفاظ بسجلات دقيقة لأوامر الشراء والعقود ومعلومات الموردين.
  • ضمان الامتثال لسياسات الشركة واللوائح الصناعية.

المؤهلات:

  • درجة البكالوريوس في إدارة سلسلة التوريد أو إدارة الأعمال أو مجال ذي صلة.
  • خبرة لا تقل عن 3 سنوات في التوريد وتخطيط المخزون.
  • إتقان أنظمة تخطيط موارد المؤسسات (ERP) وبرنامج Excel.
  • مهارات قوية في التفاوض والتواصل.

6-مهندس كيميائي

الوصف الوظيفي:
يتولى المهندس الكيميائي مسؤولية تصميم وتطوير وتحسين العمليات والمعدات الكيميائية المستخدمة في إنتاج النفط والغاز. يعمل بشكل وثيق مع فرق الإنتاج لتحسين الكفاءة وتقليل التكاليف وضمان الامتثال للوائح السلامة والبيئة. يشمل الدور إجراء البحوث وتحليل البيانات وتنفيذ تحسينات العمليات لتعزيز جودة المنتج والأداء التشغيلي.

المسؤوليات:

  • تصميم وتحسين العمليات الكيميائية لإنتاج النفط والغاز.
  • إجراء دراسات الجدوى وتقييم المخاطر للعمليات الجديدة.
  • مراقبة ومعالجة المشكلات في عمليات الإنتاج لضمان الكفاءة.
  • التعاون مع الفرق متعددة التخصصات لتنفيذ تحسينات العمليات.
  • ضمان الامتثال للوائح السلامة والصحة والبيئة.
  • تحليل البيانات وإعداد التقارير الفنية للإدارة.
  • متابعة أحدث الاتجاهات والتقنيات في الصناعة.

المؤهلات:

  • درجة البكالوريوس في الهندسة الكيميائية أو مجال ذي صلة.
  • خبرة لا تقل عن 5 سنوات في تصميم وتحسين العمليات الكيميائية.
  • إتقان برامج محاكاة العمليات.
  • مهارات قوية في حل المشكلات والتحليل.

7-مشغل معدات كيميائية

الوصف الوظيفي:
يتولى مشغل المعدات الكيميائية تشغيل ومراقبة الآلات والمعدات المستخدمة في عمليات المعالجة الكيميائية في صناعة النفط والغاز. يتطلب هذا الدور اهتماماً دقيقاً بإجراءات السلامة، حيث يتعامل المشغلون مع مواد خطرة لضمان سير العمليات بسلاسة وكفاءة. يجب على المشغلين إجراء الفحوصات الدورية، وضبط الإعدادات، وتوثيق بيانات الإنتاج للحفاظ على جودة المنتج.

المسؤوليات:

  • تشغيل ومراقبة المعدات والآلات الخاصة بمعالجة المواد الكيميائية.
  • اتباع بروتوكولات السلامة عند التعامل مع المواد الكيميائية الخطرة.
  • إجراء الفحوصات والصيانة الدورية للمعدات.
  • ضبط إعدادات الماكينات لتحسين كفاءة الإنتاج.
  • تسجيل وحفظ سجلات الإنتاج والبيانات بشكل دقيق.
  • التعرف على الأعطال ومعالجة المشكلات الفنية.
  • التعاون مع فرق الصيانة لضمان تقليل فترات التوقف.
  • الحفاظ على بيئة عمل نظيفة وآمنة.

المؤهلات:

  • شهادة الثانوية العامة أو ما يعادلها؛ شهادة فنية تعتبر ميزة إضافية.
  • خبرة لا تقل عن سنتين في تشغيل معدات المعالجة الكيميائية.
  • معرفة بأنظمة السلامة والتعامل مع المواد الخطرة.
  • مهارات ميكانيكية قوية وقدرة على حل المشكلات.

8-مهندس استجابة سريعة لصمامات التحكم

الوصف الوظيفي:
يتولى مهندس الاستجابة السريعة لصمامات التحكم تقديم الدعم الفني الفوري وحلول المشكلات المتعلقة بصمامات الاختناق وأنظمة التحكم في التدفق في عمليات النفط والغاز. يشمل الدور الاستجابة لحالات الطوارئ الميدانية، وتشخيص الأعطال، وتنفيذ الإجراءات التصحيحية لتقليل فترات التوقف عن الإنتاج.

المسؤوليات:

  • الاستجابة لحالات الطوارئ الميدانية المتعلقة بصمامات التحكم في التدفق.
  • تشخيص الأعطال وإصلاح الأعطال والمشاكل الفنية.
  • تنفيذ الإجراءات التصحيحية لاستعادة وظائف النظام.
  • التعاون مع فرق العمل الميدانية والعملاء لتقديم الدعم الفني.
  • إجراء اختبارات الأداء وضمان المعايرة الصحيحة لمعدات التحكم في التدفق.
  • الاحتفاظ بسجلات مفصلة للحوادث والإجراءات التصحيحية.
  • ضمان الامتثال لمعايير السلامة والعمليات التشغيلية.
  • تقديم التوصيات لتحسين الأنظمة وترقيتها.

المؤهلات:

  • درجة البكالوريوس في الهندسة الميكانيكية أو هندسة البترول أو مجال ذي صلة.
  • خبرة لا تقل عن 4 سنوات في أنظمة التحكم في التدفق وصمامات الاختناق.
  • مهارات قوية في حل المشكلات والتحليل.
  • القدرة على العمل تحت الضغط والاستجابة السريعة للطوارئ.

9-مشغل ماكينات CNC

الوصف الوظيفي:
يتولى مشغل ماكينات CNC تشغيل وبرمجة ماكينات التحكم العددي بالكمبيوتر لإنتاج أجزاء ومكونات دقيقة تُستخدم في صناعة النفط والغاز. يتطلب هذا الدور خبرة في قراءة المخططات، وإعداد الماكينات، وإجراء فحوصات الجودة لضمان تطابق المنتجات النهائية مع المواصفات الدقيقة.

المسؤوليات:

  • برمجة وإعداد وتشغيل ماكينات CNC لإنتاج الأجزاء الدقيقة.
  • قراءة وتفسير المخططات والرسومات الفنية.
  • إجراء فحوصات الجودة لضمان توافق الأجزاء مع المواصفات.
  • ضبط إعدادات الماكينات لتحسين الأداء والإنتاجية.
  • صيانة المعدات ومعالجة الأعطال حسب الحاجة.
  • توثيق أنشطة الإنتاج والاحتفاظ بسجلات دقيقة.
  • الالتزام ببروتوكولات السلامة ومعايير الشركة.

المؤهلات:

  • شهادة الثانوية العامة أو ما يعادلها؛ يفضل الحصول على شهادة فنية في تشغيل ماكينات CNC.
  • خبرة لا تقل عن 3 سنوات في تشغيل ماكينات CNC.
  • إتقان قراءة المخططات واستخدام أدوات القياس الدقيقة.
  • مهارات ميكانيكية قوية وانتباه للتفاصيل.

10-مشغل ماكينات  

الوصف الوظيفي:
يتولى مشغل ماكينات CNC تشغيل وصيانة ماكينات التحكم العددي بالكمبيوتر لإنتاج الأجزاء والمكونات الدقيقة المستخدمة في التطبيقات الصناعية المختلفة. يتطلب هذا الدور فهماً قوياً لتشغيل الماكينات، والقدرة على تفسير المخططات الفنية، والانتباه إلى التفاصيل لضمان جودة المنتجات.

المسؤوليات:

  • تشغيل ومراقبة ماكينات CNC لإنتاج المكونات الدقيقة.
  • قراءة وتفسير المخططات الفنية وأوامر العمل.
  • ضبط إعدادات الماكينة وإجراء تغييرات الأدوات حسب الحاجة.
  • فحص المنتجات النهائية لضمان توافقها مع مواصفات الجودة.
  • صيانة المعدات بشكل دوري ومعالجة الأعطال.
  • توثيق أنشطة الإنتاج والاحتفاظ بسجلات دقيقة.
  • ضمان الامتثال للوائح السلامة ومعايير الشركة.

المؤهلات:

  • شهادة الثانوية العامة أو ما يعادلها؛ يفضل الحصول على شهادة فنية في تشغيل ماكينات CNC.
  • خبرة لا تقل عن سنتين في تشغيل ماكينات CNC.
  • إتقان قراءة وتفسير المخططات الفنية.
  • مهارات ميكانيكية قوية وانتباه للتفاصيل.

11-مهندس تصنيع - مركز الابتكار

الوصف الوظيفي:
يتولى مهندس التصنيع في مركز الابتكار (COI) تصميم وتطوير وتحسين عمليات التصنيع لزيادة الإنتاجية والكفاءة وجودة المنتجات. يشمل الدور تحليل تدفقات العمل في الإنتاج، وتطبيق التقنيات الجديدة، والتعاون مع الفرق متعددة التخصصات لحل التحديات التشغيلية.

المسؤوليات:

  • تصميم وتنفيذ عمليات التصنيع لتحسين الكفاءة والجودة.
  • تحليل تدفقات العمل الإنتاجية وتحديد مجالات التحسين.
  • التعاون مع فرق التصميم والجودة والإنتاج لتحسين العمليات.
  • تطبيق تقنيات وحلول الأتمتة الجديدة.
  • إعداد الوثائق المتعلقة بعمليات التصنيع.
  • ضمان الامتثال لمعايير السلامة والجودة.
  • تقديم الدعم الفني والتدريب للموظفين في الإنتاج.

المؤهلات:

  • درجة البكالوريوس في الهندسة الميكانيكية أو الصناعية أو هندسة التصنيع.
  • خبرة لا تقل عن 3 سنوات في هندسة التصنيع.
  • مهارات قوية في حل المشكلات والتحليل.
  • إتقان برامج CAD ومحاكاة عمليات التصنيع.

12-مهندس ميداني - إتمام الآبار

الوصف الوظيفي:
يتولى المهندس الميداني للإتمام مسؤولية الإشراف على عمليات إتمام الآبار في صناعة النفط والغاز، بما في ذلك تصميم وتنفيذ استراتيجيات الإتمام، والتنسيق مع الفرق الميدانية، وضمان تنفيذ العمليات بأمان وكفاءة.

المسؤوليات:

  • تصميم وتنفيذ خطط إتمام الآبار.
  • تنسيق العمليات الميدانية وإدارة الفرق في الموقع.
  • مراقبة أداء الآبار وإجراء التعديلات لتحسين الإنتاج.
  • معالجة المشكلات وتقديم الدعم الفني للفرق الميدانية.
  • ضمان الامتثال للوائح السلامة والبيئة.
  • إعداد وحفظ تقارير مفصلة عن أنشطة الإتمام.
  • التعاون مع العملاء وأصحاب المصلحة لتحقيق أهداف المشروع.

المؤهلات:

  • درجة البكالوريوس في هندسة البترول أو مجال ذي صلة.
  • خبرة لا تقل عن 4 سنوات في عمليات إتمام الآبار.
  • معرفة قوية بتقنيات وأدوات الإتمام.

13-مهندس كهرباء - أنظمة التحكم

الوصف الوظيفي:
يتولى مهندس التحكم الكهربائي تصميم وتطوير وتنفيذ أنظمة التحكم الكهربائي للآلات والعمليات الصناعية. يشمل الدور إنشاء المخططات الكهربائية، وبرمجة أنظمة التحكم، وضمان التشغيل السلس للمعدات من خلال معالجة الأعطال والصيانة.

المسؤوليات:

  • تصميم وتطوير أنظمة التحكم الكهربائي للآلات الصناعية.
  • إعداد وتفسير المخططات الكهربائية والرسومات الفنية.
  • برمجة وحدات التحكم المنطقي القابلة للبرمجة (PLCs) وأنظمة التحكم الأخرى.
  • إجراء الاختبارات، وحل المشكلات، وصيانة الأنظمة.
  • التعاون مع الفرق الميكانيكية والبرمجية لتكامل أنظمة التحكم.
  • ضمان الامتثال لمعايير السلامة والصناعة.
  • توثيق تصاميم الأنظمة والتحديثات وأنشطة الصيانة.

المؤهلات:

  • درجة البكالوريوس في الهندسة الكهربائية أو مجال ذي صلة.
  • خبرة لا تقل عن 3 سنوات في هندسة أنظمة التحكم.
  • إتقان برمجة PLC وتصميم أنظمة التحكم.
  • مهارات قوية في حل المشكلات والتحليل.

14-مهندس أنظمة التحكم

الوصف الوظيفي:
يتولى مهندس أنظمة التحكم مسؤولية تصميم وتحسين أنظمة التحكم التي تدير وتؤتمت العمليات الصناعية. يعمل هذا المهندس عن كثب مع مطوري البرمجيات والمهندسين الكهربائيين والفنيين الميدانيين لضمان تكامل سلس بين مكونات الأجهزة والبرامج.

المسؤوليات:

  • تصميم وتطوير وتنفيذ أنظمة التحكم للأتمتة الصناعية.
  • التعاون مع الفرق متعددة التخصصات لضمان تكامل النظام.
  • اختبار وتصحيح أنظمة التحكم لضمان التشغيل السليم.
  • تحسين أنظمة التحكم لتحقيق الكفاءة والموثوقية.
  • إعداد الوثائق والأدلة التشغيلية لأنظمة التحكم.
  • تقديم الدعم الفني والتدريب للمستخدمين النهائيين.
  • ضمان الامتثال لمعايير الصناعة ولوائح السلامة.

المؤهلات:

  • درجة البكالوريوس في هندسة أنظمة التحكم أو الهندسة الكهربائية أو مجال ذي صلة.
  • خبرة لا تقل عن 3 سنوات في تصميم وتنفيذ أنظمة التحكم.
  • إتقان برمجة PLC وSCADA وHMI.
  • مهارات تحليلية وحل مشكلات قوية.

15-مشغل نظام التكسير

الوصف الوظيفي:
يتولى مشغل نظام التكسير تشغيل وصيانة أنظمة التكسير المستخدمة في عمليات التعدين والصناعات. يشمل الدور مراقبة أداء المعدات، وإجراء التعديلات لتحسين الكفاءة، وصيانة المعدات بشكل دوري لمنع فترات التوقف.

المسؤوليات:

  • تشغيل ومراقبة معدات التكسير لضمان الأداء الأمثل.
  • ضبط الإعدادات لتحقيق أقصى إنتاجية وكفاءة.
  • إجراء الصيانة الدورية وحل المشكلات الفنية للمعدات.
  • الاحتفاظ بسجلات دقيقة للإنتاج والصيانة.
  • ضمان الامتثال لمعايير السلامة واللوائح البيئية.
  • التعاون مع فرق الصيانة لإجراء الإصلاحات وترقيات المعدات.
  • إجراء الفحوصات لتحديد الأعطال المحتملة للمعدات.

المؤهلات:

  • شهادة الثانوية العامة أو ما يعادلها؛ يفضل الحصول على شهادة فنية.
  • خبرة لا تقل عن سنتين في تشغيل أنظمة التكسير.
  • معرفة بالنظم الميكانيكية وصيانة المعدات.
  • اهتمام قوي بالسلامة والانتباه للتفاصيل.

16- مصمم / مهندس مبتدئ

الوصف الوظيفي:
يتولى المصمم / المهندس المبتدئ مساعدة في تصميم وتطوير المكونات الميكانيكية أو الكهربائية أو الهيكلية المستخدمة في التطبيقات الصناعية. يشمل الدور إنشاء رسومات فنية تفصيلية، ودعم المهندسين الكبار في تنفيذ المشاريع، وضمان توافق التصاميم مع مواصفات العملاء والمعايير الصناعية.

المسؤوليات:

  • المساعدة في تصميم وتطوير المكونات والأنظمة.
  • إعداد الرسومات الفنية والمخططات باستخدام برامج CAD.
  • دعم المهندسين الكبار في تخطيط وتنفيذ المشاريع.
  • إجراء محاكاة واختبارات أساسية للتحقق من صحة التصاميم.
  • ضمان امتثال التصاميم للمعايير الصناعية ومتطلبات العملاء.
  • التعاون مع فرق التصنيع لضمان قابلية التنفيذ للتصميم.
  • توثيق المشاريع وتحديث التعديلات في التصميم.

المؤهلات:

  • درجة البكالوريوس في الهندسة (الميكانيكية أو الكهربائية أو مجال ذي صلة).
  • إتقان برامج CAD (مثل AutoCAD وSolidWorks).
  • 1-2 سنوات من الخبرة في التصميم أو الهندسة (تشمل التدريبات).
  • مهارات قوية في حل المشكلات والتحليل.

17-مهندس كهرباء

الوصف الوظيفي:
يتولى مهندس الكهرباء تصميم وتطوير وصيانة الأنظمة والمكونات الكهربائية المستخدمة في التطبيقات الصناعية والتجارية. يشمل الدور إجراء الحسابات الكهربائية، وإعداد المخططات التفصيلية، وضمان الامتثال لمعايير السلامة واللوائح التنظيمية.

المسؤوليات:

  • تصميم وتطوير الأنظمة والمكونات الكهربائية.
  • إجراء الحسابات الكهربائية والمحاكاة.
  • إعداد وتفسير المخططات الكهربائية والرسومات الفنية.
  • ضمان توافق الأنظمة مع معايير السلامة والصناعة.
  • معالجة المشكلات وحل أعطال الأنظمة الكهربائية.
  • التعاون مع الأقسام الأخرى لتحسين أداء الأنظمة.
  • توثيق تصاميم الأنظمة والتحديثات وأنشطة الصيانة.

المؤهلات:

  • درجة البكالوريوس في الهندسة الكهربائية.
  • خبرة لا تقل عن 3 سنوات في تصميم الأنظمة الكهربائية.
  • إتقان برامج CAD وبرامج المحاكاة الكهربائية.
  • مهارات تحليلية وحل مشكلات قوية.

18 - مصمم CAD إلكتروني

الوصف الوظيفي:
يتولى مصمم CAD الإلكتروني إعداد وتحديث المخططات الإلكترونية وتصميمات لوحات الدوائر المطبوعة (PCB) باستخدام برامج CAD. يعمل هذا الدور بشكل وثيق مع المهندسين لتحويل المفاهيم التصميمية إلى رسومات تفصيلية وضمان توافق التصاميم مع المعايير الصناعية ومتطلبات التصنيع.

المسؤوليات:

  • إعداد المخططات الإلكترونية وتصميمات PCB باستخدام أدوات CAD.
  • التعاون مع المهندسين لتطوير تصاميم إلكترونية تفصيلية.
  • ضمان توافق التصاميم مع المعايير الصناعية ومواصفات التصنيع.
  • إجراء مراجعات للتصميم وتنفيذ التعديلات اللازمة.
  • توثيق التصاميم وتحديث الوثائق.
  • دعم فريق التصنيع خلال عملية الإنتاج.
  • معالجة المشكلات المتعلقة بالتصميم وتقديم الحلول.

المؤهلات:

  • دبلوم أو درجة البكالوريوس في هندسة الإلكترونيات أو مجال ذي صلة.
  • إتقان أدوات CAD لتصميم PCB (مثل Altium وEagle).
  • خبرة لا تقل عن سنتين في التصميم الإلكتروني.
  • انتباه قوي للتفاصيل ومهارات تحليلية.

19- فني إلكترونيات

الوصف الوظيفي:
يتولى فني الإلكترونيات مسؤولية تركيب وصيانة وإصلاح المعدات الإلكترونية المستخدمة في البيئات الصناعية أو التجارية أو التصنيعية. يتطلب هذا الدور خبرة عملية في المكونات الإلكترونية ولوحات الدوائر وأجهزة الاختبار. يقوم الفني بتشخيص الأعطال واستبدال الأجزاء التالفة وضمان تشغيل الأنظمة الإلكترونية بكفاءة وأمان.

المسؤوليات:

  • تركيب وصيانة وإصلاح المعدات والأنظمة الإلكترونية.
  • تشخيص المشكلات في لوحات الدوائر والمكونات الإلكترونية.
  • إجراء الصيانة الدورية والاختبارات لضمان الأداء الأمثل.
  • استبدال أو إصلاح المكونات والأجزاء التالفة.
  • التعاون مع المهندسين لتنفيذ ترقيات وتحسينات الأنظمة.
  • الاحتفاظ بسجلات دقيقة لأنشطة الصيانة والإصلاح.
  • ضمان الامتثال للوائح السلامة والمعايير الصناعية.

المؤهلات:

  • دبلوم أو درجة جامعية في تكنولوجيا الإلكترونيات أو مجال ذي صلة.
  • خبرة لا تقل عن 3 سنوات كفني إلكترونيات.
  • إتقان استخدام أجهزة التشخيص والاختبار.
  • مهارات قوية في حل المشكلات والانتباه للتفاصيل.

20- مهندس برمجيات مضمنة - حديث التخرج

الوصف الوظيفي:
يتولى مهندس البرمجيات المضمنة (حديث التخرج) تطوير واختبار البرمجيات التي تعمل على الأنظمة المضمنة المستخدمة في الأجهزة الإلكترونية المختلفة. يوفر هذا الدور مستوى دخول للمهندسين الجدد للعمل مع مهندسين ذوي خبرة لتصميم وكتابة وتصحيح البرمجيات التي تتكامل مباشرة مع مكونات الأجهزة.

المسؤوليات:

  • تطوير واختبار البرمجيات المضمنة للأجهزة الإلكترونية.
  • كتابة وتصحيح وتحسين الأكواد البرمجية بلغة C/C++ أو لغات البرمجة المضمنة الأخرى.
  • التعاون مع مهندسي الأجهزة لضمان تكامل سلس بين البرمجيات والأجهزة.
  • إجراء اختبارات على مستوى النظام ومعالجة مشكلات البرمجيات.
  • تحسين أداء البرمجيات من حيث السرعة والموثوقية.
  • توثيق تصاميم البرمجيات، وحالات الاختبار، والأدلة التشغيلية.
  • متابعة آخر التطورات في الأنظمة المضمنة والتقنيات ذات الصلة.

المؤهلات:

  • درجة البكالوريوس في هندسة الكمبيوتر أو الهندسة الكهربائية أو مجال ذي صلة.
  • حديث التخرج مع خبرة تدريبية أو مشروع في الأنظمة المضمنة.
  • إتقان البرمجة بلغة C/C++ للأنظمة المضمنة.
  • فهم أساسي لوحدات التحكم الدقيقة وأنظمة التشغيل الفورية (RTOS) وواجهات الأجهزة.
  • مهارات قوية في حل المشكلات والتحليل.

21. تدريب الهندسة والجيولوجيا
22. أخصائي حلول بيئية
23. مشغل معدات
24. محلل بيانات ميداني - خدمات جيولوجية
25. مهندس ميداني
26. متدرب مهندس ميداني
27. منسق الصحة والسلامة والبيئة


28. أخصائي خدمة ميدانية
29. أخصائي خدمة ميدانية
30. متدرب أخصائي ميداني
31. مشرف/أخصائي ميداني – الأنابيب الملفوفة
32. أخصائيون ميدانيون
33. أخصائيون ميدانيون توجيهية


34. متدربون ميدانيون - خريجو دبلوم
35. فني آلات تركيب
36. مشغل تدفق
37. أخصائي تدفق
38. جيولوجي
39. مهندس جيوميكانيك
40. جيولوجي في حلول الجيوفيزياء


41. محلل بيانات GSS
42. محلل Mud Logging GSS
43. مشغل معدات ثقيلة
44. مهندس IoT صناعي
45. مفتش
46. مهندس عمليات
47. أخصائي QHSE
48. فني آلات
49. مساعد صيانة


50. ميكانيكي صيانة
51. متدربو صيانة ميكانيكية وكهربائية/إلكترونية
52. فني صيانة
53. مهندس تصنيع
54. مخطط تصنيع
55. منظم جدولة رئيسي
56. تخطيط الإنتاج
57. معالج المواد


58. مهندس ميكانيكي
59. مهندس ميكانيكي دوار
60. مهندس ميكانيكي ثابت وأوعية
61. فني ميكانيكي
62. فني ميكانيكي (ميكانيكي مركبات ثقيلة ديزل)
63. مشرف MPD/UBD
64. محلل Mud Logging - GeoServices
65. أخصائي MWD


66. مشغل
67. مهندس OSS Manifold
68. مهندس خدمات OSS
69. مهندس أنظمة OSS كبير
70. مصمم أنابيب
71. مخطط/جدولة
72. مشغل مصنع
73. مهندس عمليات


74. مهندس إنتاج
75. صيانة الإنتاج
76. فني
77. مخطط إنتاج
78. قائد فريق الإنتاج
79. قائد فريق فني آلات
80. مهندس جودة المشروع


81. مفتش QC
82. مهندس جودة
83. مفتش جودة
84. مهندس خزان
85. مهندس تدفق ضمان كبير
86. مهندس عمليات كبير
87. مهندس موثوقية كبير
88. مصمم أوعية كبير


89. أخصائي/مشرف سلك خط ميداني
90. مشغل لفة
91. مهندس خزان
92. مهندس هيكلي
93. مهندس موصلات تحت البحر
94. أخصائي التحكم تحت البحر ميداني
95. مهندس نظم
96. أخصائي دعم تقني
97. فني
98. مشغل اختبار


99. فني صمامات (فني آلات تركيب)
100. مهندس تحديد المواقع
101. قائد موقع البئر
102. مهندس ميداني سلك خط
103. أخصائي مهندس ميداني سلك خط
104. فني ميكانيكي سلك خط
105. رافع مستوى 3


106. مخطط - مجدول
107. مفتش سقالات
108. مفتش معدات ثقيلة
109. مفتش كهربائي
110. منسق PTW
111. مشرف لحام QC
112. مشرف كهرباء QC
113. مفتش بناء QC


114. مفتش أنابيب RTR QC
115. مفتش هيكل فولاذي QC
116. مفتش صيانة QC (ثابت)
117. مترجم أفلام RT QC
118. منسق NDT QC
119. مفتش كهرباء QC
120. مفتش طلاء/عزل QC

يرجى مشاركة سيرتك الذاتية المحدثة - vjossy@unisisengineering.com

vjossy@unisisengineering.com


Comments