1. BMS Estimation Engineer

Job Overview

The BMS Estimation Engineer position with Inspire Talent Acquisition in Qatar is part of engineering estimation and project planning. Its central professional focus is the accuracy of technical submissions and commercial estimates, alongside effective coordination within the relevant team.

Job Description and Responsibilities

The work combines coordination of technical documents and project inputs with organized follow-through and careful communication. Day-to-day activities vary with the technical and operational scope of this position.

We are seeking a skilled and experienced BMS Estimation Engineer to join our growing team. The ideal candidate will be responsible for preparing accurate cost estimates, reviewing project requirements, and supporting the bidding process for Building Management System (BMS) projects.

• Prepare detailed cost estimates for BMS projects.
• Review tender documents, BOQs, specifications, and drawings.
• Analyze HVAC, Electrical, ELV, and control system requirements.
• Coordinate with suppliers and subcontractors for quotations.
• Prepare technical proposals, compliance statements, and bid submissions.
• Support sales and project teams during tender negotiations.
• Attend site visits and pre-bid meetings as required.

Role Details and Requirements

Location: Doha, Qatar. Employment: Full-time.

Advertised requirements:

• Bachelor’s Degree in Electrical, Mechanical, Mechatronics, or Electronics & Communication Engineering.
• Minimum 5 years of experience in BMS estimation.
• Strong knowledge of HVAC systems, BMS architecture, and automation controls.
• Familiarity with BMS platforms such as Honeywell, Schneider, or similar.
• Proficiency in AutoCAD, MS Office, and estimation tools/software.
• Good understanding of communication protocols like BACnet and Modbus.
• Strong analytical, communication, and negotiation skills.
• GCC/Qatar experience is an advantage.
• Ability to work under pressure and meet tender deadlines.
• Knowledge of local standards and regulations.

How to Apply and Contacts

Open vacancy page

2. Chaat Maker

Job Overview

The Chaat Maker position with Inspire Talent Acquisition in Qatar is part of hospitality and operational services. Its central professional focus is consistent service standards and organized delivery, alongside effective coordination within the relevant team.

Job Description and Responsibilities

The work combines coordination of daily service tasks with organized follow-through and careful communication. Day-to-day activities vary with the technical and operational scope of this position.

We are currently hiring a Chaat Maker for a vibrant restaurant operating under a reputable facility management company in Qatar. The ideal candidate will have 1–2 years of experience in preparing traditional chaat and street food delicacies. This role is perfect for someone with a passion for cuisine and a commitment to delivering high-quality dishes in a fast-paced restaurant environment.

• Prepare a wide variety of chaat items such as Pani Puri, Bhel Puri, Papdi Chaat, Sev Puri, Aloo Tikki, and other regional favorites.
• Ensure authentic taste, attractive presentation, and food quality at all times.
• Maintain cleanliness and hygiene in the preparation and service areas in accordance with HACCP and company standards.
• Monitor and manage ingredient stock and assist in placing orders as needed.
• Coordinate with kitchen staff to ensure smooth kitchen operations during peak hours.
• Follow all food safety, sanitation, and facility management protocols.

Role Details and Requirements

Location: Doha, Qatar. Employment: Full-time.

Advertised requirements:

• 1–2 years of experience working as a Chaat Maker or in a similar role, preferably in a restaurant setting.
• Sound knowledge of street food and traditional preparation techniques.
• Ability to work efficiently under pressure in a fast-paced kitchen environment.
• Good communication skills and the ability to work as part of a team.
• Must be currently in Qatar or willing to relocate.
• Food & Beverage

How to Apply and Contacts

Open vacancy page

3. Master of Ceremonies

Job Overview

The Master of Ceremonies position with Inspire Talent Acquisition in Qatar is part of the functional area of the named position. Its central professional focus is consistent work quality and organized delivery, alongside effective coordination within the relevant team.

Job Description and Responsibilities

The work combines team coordination and accurate records with organized follow-through and careful communication. Day-to-day activities vary with the technical and operational scope of this position.

We are looking for an energetic and engaging MC to support an entertainment event at Souq Waqif. The candidate will be responsible for hosting and engaging with the audience.

• Host and present the entertainment event in an energetic and professional manner.
• Engage with the audience and create a lively and welcoming atmosphere.
• Make announcements, introduce performers, activities, and special segments.
• Interact with guests and encourage audience participation.
• Coordinate with the event team to ensure smooth transitions between activities.
• Maintain a positive and entertaining presence throughout the event.
• Adapt announcements and audience interaction according to the event schedule.
• Handle unexpected situations professionally and confidently.

Role Details and Requirements

Location: Doha, Qatar. Employment: Full-time.

Advertised requirements:

• Previous experience as an MC, event host, presenter, or photographer.
• Strong public speaking and audience engagement skills.
• Fluency in Arabic and English is preferred.
• Confident, energetic, friendly, and presentable personality.
• Good communication and interpersonal skills.
• Professional photography skills and knowledge of camera equipment.
• Ability to work in a busy entertainment/event environment.
• Ability to work from 5:00 PM to 9:30 PM throughout the event period.
• Guest Services
• Contractual

How to Apply and Contacts

Open vacancy page

4. Driver Coordinator

Job Overview

The Driver Coordinator position with Inspire Talent Acquisition in Qatar is part of administration, coordination and management. Its central professional focus is well-organized processes and accountable delivery, alongside effective coordination within the relevant team.

Job Description and Responsibilities

The work combines communication between relevant teams with organized follow-through and careful communication. Day-to-day activities vary with the technical and operational scope of this position.

We are seeking an organized and proactive Driver Coordinator to manage daily driver operations, coordinate transportation schedules, plan routes, and ensure the smooth movement of vehicles and drivers. The ideal candidate should have experience in fleet or transportation operations, good coordination skills, and basic vehicle troubleshooting knowledge.

• Coordinate daily driver schedules, routes, and task assignments.
• Monitor driver activities, attendance, and daily movements.
• Ensure timely transportation services and efficient vehicle utilization.
• Handle operational issues, delays, and driver-related concerns.
• Coordinate vehicle maintenance, inspections, and basic troubleshooting.
• Maintain records of driver schedules, vehicle usage, and operational activities.
• Ensure drivers comply with company policies, traffic regulations, and safety standards.
• Communicate with drivers and relevant departments to ensure smooth daily operations.

Role Details and Requirements

Location: Doha, Qatar. Employment: Full-time.

Advertised requirements:

• Previous experience in driver coordination, fleet management, or transportation operations.
• Good organizational and coordination skills, including route planning and scheduling.
• Basic technical knowledge of vehicles and troubleshooting.
• Ability to monitor drivers and manage daily operational activities.
• Good communication and problem-solving skills.
• Arabic-speaking candidates are preferred.
• Operations

How to Apply and Contacts

Open vacancy page

5. Infrastructure Engineer

Job Overview

The Infrastructure Engineer position with Inspire Talent Acquisition in Qatar is part of engineering and technical services. Its central professional focus is equipment availability and reliable technical delivery, alongside effective coordination within the relevant team.

Job Description and Responsibilities

The work combines coordination of inspection and operating activities with organized follow-through and careful communication. Day-to-day activities vary with the technical and operational scope of this position.

We are seeking a highly experienced Infrastructure Engineer to take technical ownership of our hybrid infrastructure environment. This is a hands-on engineering role requiring strong expertise across enterprise networking, systems administration, virtualization, cloud platforms, cybersecurity controls, monitoring, backup, disaster recovery, and automation. The successful candidate will be capable of independently designing, troubleshooting, and improving complex infrastructure environments across on-premises data centers, schools/entities, and cloud platforms. The role will provide technical leadership to infrastructure operations, drive cloud adoption and modernization, and ensure the availability, security, resilience, and performance of critical IT services.

• 1. Hybrid Cloud & Infrastructure Architecture:
• Design, deploy, manage, and continuously improve hybrid infrastructure across Azure, Google Cloud, and on-premises data centers.
• Own technical architecture for compute, storage, virtualization, cloud services, and core infrastructure platforms.
• Lead cloud migration, modernization, capacity planning, scalability, and infrastructure optimization initiatives.
• Assess current infrastructure and define practical roadmaps for cloud adoption, modernization, resilience, and lifecycle replacement.
• Provide senior technical guidance for infrastructure projects, designs, standards, and technology decisions.
• 2. Enterprise Systems & Server Administration:
• Administer and troubleshoot Windows Server and Linux (Ubuntu/RHEL) environments at an enterprise level.
• Manage Active Directory, Domain Controllers, DNS, DHCP, Group Policies, file services, certificates, and core Windows infrastructure.
• Manage Microsoft 365 services including Exchange Online, Teams, and related administrative services.
• Design, manage, and troubleshoot VMware, Hyper-V, and ESXi virtualization environments.
• Manage server lifecycle, patching, hardening, capacity, performance, and availability.
• 3. Network Engineering & Connectivity:
• Design, implement, manage, and troubleshoot LAN, WAN, WLAN, routing, switching, VLANs, DNS, DHCP, and network services.
• Manage and troubleshoot enterprise firewalls, VPNs, load balancers, IDS/IPS, and related security/network appliances.
• Design and maintain secure connectivity between sites, data centers, and cloud environments using Site-to-Site VPN, ExpressRoute, Direct Connect, or equivalent technologies.
• Diagnose complex network and infrastructure incidents and provide root-cause analysis rather than relying solely on escalation.
• Maintain network and infrastructure diagrams, standards, IP addressing, configurations, and operational documentation.
• 4. Cloud Engineering & Security:
• Hands-on administration of Azure and/or Google Cloud services including compute, storage, networking, IAM, monitoring, backup, and security controls.
• Implement cloud landing-zone concepts, identity controls, network segmentation, secure connectivity, and least-privilege access.
• Monitor cloud resource utilization, availability, performance, and cost, and recommend optimization actions.
• Support secure migration of workloads from on-premises environments to cloud platforms.
• Apply cloud security and operational best practices aligned with ISO 27001, NIST, and CIS principles.
• 5. Backup, Disaster Recovery & Resilience:
• Own infrastructure backup strategy and ensure reliable backup operations using Veeam, Azure Backup, or equivalent platforms.
• Design, document, and test disaster recovery, business continuity, and restoration procedures.
• Define recovery objectives and ensure critical systems have appropriate redundancy and recovery mechanisms.
• Investigate backup failures and lead corrective actions to maintain agreed recovery readiness.
• 6. Monitoring, Automation & Operational Excellence:
• Implement infrastructure monitoring and observability using Azure Monitor, Prometheus, Grafana, ELK, or equivalent tools.
• Develop dashboards, alerts, capacity reports, and operational metrics for proactive infrastructure management.
• Automate provisioning, configuration, patching, monitoring, and repetitive operational activities using PowerShell, Bash, Python, Ansible, Terraform, or equivalent.
• Establish infrastructure standards, runbooks, operational procedures, and configuration baselines.
• Lead problem management and root-cause analysis for recurring infrastructure and service issues.
• 7. Technical Leadership & Team Development:
• Act as the senior technical authority for infrastructure, providing direction to network, systems, and technical support resources.
• Mentor and develop junior engineers and administrators through knowledge transfer, documentation, and hands-on coaching.
• Review infrastructure changes, designs, configurations, and implementation plans for technical quality and risk.
• Work closely with Development, Application Support, Cybersecurity, and business stakeholders to deliver reliable technology services.
• Required Qualifications:
• Bachelor’s degree in Computer Science, Information Technology, Engineering, or related field.
• 8+ years of hands-on experience across enterprise infrastructure, networking, systems administration, virtualization, and cloud environments.
• Demonstrated experience in a senior infrastructure, systems, network, cloud, or infrastructure architect/engineering role.
• Strong hands-on experience with Azure and/or Google Cloud, including compute, storage, networking, IAM, monitoring, backup, and security.
• Strong enterprise networking knowledge covering routing, switching, VLANs, TCP/IP, DNS, DHCP, VPNs, firewalls, wireless, load balancing, and hybrid connectivity.
• Advanced Windows Server and Linux administration, Active Directory, DNS, Group Policy, Microsoft 365, and core infrastructure services.
• Strong experience with VMware, Hyper-V, and/or ESXi.
• Proven experience managing physical and virtual servers, storage, data center infrastructure, and enterprise platforms.
• Experience with automation & IaC such as Terraform, Ansible, PowerShell, Bash, and/or Python.
• Knowledge with Prometheus, Grafana, Azure Monitor, CloudWatch, ELK, or equivalent.
• Strong understanding of infrastructure security, hardening, IAM, MFA, segmentation, patching, vulnerability management, and secure configuration.
• Working knowledge of Docker, Kubernetes, and CI/CD concepts is preferred.

Role Details and Requirements

Location: Doha, Qatar. Employment: Full-time.

How to Apply and Contacts

Open vacancy page

6. Procurement Officer

Job Overview

The Procurement Officer position with Inspire Talent Acquisition in Qatar is part of procurement and supply operations. Its central professional focus is timely supply and reliable records, alongside effective coordination within the relevant team.

Job Description and Responsibilities

The work combines monitoring purchase requests and material movement with organized follow-through and careful communication. Day-to-day activities vary with the technical and operational scope of this position.

We are looking for a motivated Procurement Officer to support purchasing operations, supplier coordination, and material sourcing activities. The role involves assisting in cost-effective procurement while ensuring timely delivery of materials and services.

• Develop and execute procurement strategies aligned with project objectives, technical requirements and cost targets.
• Collaborate with engineering, project & facility management teams to identify equipment, materials and services required (including long-lead items).
• Source, evaluate and pre-qualify vendors, request quotations, analyze technical/commercial offers and recommend awards.
• Negotiate contracts, purchase orders and terms & conditions with suppliers/vendors to achieve best value, quality and delivery.
• Monitor supplier performance, delivery schedule, lead times and resolve procurement issues (delays, quality non-conformance, logistics).
• Maintain and update procurement records, vendor databases, material master data, and cost-saving reports.
• Ensure compliance with company procurement policy, Qatar import/export procedures, HSE/quality standards, and vendor contractual obligations.
• Provide market intelligence on equipment trends, supplier capabilities and cost benchmarks to inform sourcing decisions.
• Coordinate with logistics/warehouse/contracting teams to ensure timely receipt of materials/equipment and optimal stock levels.
• Support continuous improvement of procurement processes and systems (including e-procurement/CMMS if applicable).

Role Details and Requirements

Location: Doha, Qatar. Employment: Full-time.

Advertised requirements:

• Bachelor’s degree in Engineering (Mechanical, Electrical, Civil or similar) or Supply Chain/Procurement discipline.
• Proven experience in procurement within MEP contracting, facility management or industrial environment (preferably in Qatar/GCC).
• Strong understanding of technical specifications for mechanical, electrical, automation and facility equipment/systems.
• Excellent negotiation and supplier management skills.
• Proficiency with procurement software / ERP systems and MS Office.
• Strong analytical, communication and interpersonal skills.
• Ability to work effectively in a multicultural team and handle multiple demands and competing priorities. Knowledge of Qatar customs/import regulations, and local supplier market is an advantage.
• Valid Qatar residency/work permit eligibility or transferable visa preferred.
• Operations

How to Apply and Contacts

Open vacancy page

7. Marine Electrical Engineer

Job Overview

The Marine Electrical Engineer position with Inspire Talent Acquisition in Qatar is part of marine and offshore operations. Its central professional focus is operational readiness and safe execution at marine sites, alongside effective coordination within the relevant team.

Job Description and Responsibilities

The work combines coordination among vessel and site teams with organized follow-through and careful communication. Day-to-day activities vary with the technical and operational scope of this position.

We are seeking an experienced Marine Electrical Engineer to maintain, troubleshoot, inspect, and repair marine electrical systems. The successful candidate will ensure the safe and reliable operation of onboard electrical equipment while complying with maritime regulations, safety standards, and preventive maintenance schedules.

• Perform preventive, corrective, and emergency maintenance on marine electrical systems and equipment.
• Diagnose and repair faults in generators, switchboards, motors, transformers, batteries, chargers, lighting, control panels, and electrical distribution systems.
• Carry out planned preventive maintenance (PPM) and maintain accurate service records.
• Read and interpret electrical drawings, schematics, and technical manuals.
• Coordinate electrical maintenance during vessel servicing and dry docking.
• Monitor system performance and recommend improvements to enhance reliability.
• Ensure the availability of required spare parts and maintenance materials.
• Respond promptly to electrical breakdowns and emergency repairs.
• Ensure compliance with maritime regulations, HSE requirements, and industry standards.
• Collaborate with engineering and operations teams to minimize equipment downtime.

Role Details and Requirements

Location: Doha, Qatar. Employment: Full-time.

Advertised requirements:

• Bachelor's Degree or Diploma in Electrical Engineering, Marine Electrical Engineering, or a related field.
• Minimum 5 years of experience in marine electrical maintenance or a similar role.
• Strong knowledge of marine electrical systems, including generators, switchboards, motors, batteries, control panels, and electrical distribution systems.
• Experience with planned preventive maintenance (PPM) and electrical troubleshooting.
• Ability to read electrical schematics and technical drawings.
• Familiarity with maritime safety regulations and standards.
• Good analytical, problem-solving, and communication skills.
• Proficiency in Microsoft Office; CMMS experience is an advantage.
• Good command of written and spoken English.

How to Apply and Contacts

Open vacancy page

8. Private Tutor

Job Overview

The Private Tutor position with Inspire Talent Acquisition in Qatar is part of education and training. Its central professional focus is structured learning and consistent learner support, alongside effective coordination within the relevant team.

Job Description and Responsibilities

The work combines planning activities and reviewing learning outcomes with organized follow-through and careful communication. Day-to-day activities vary with the technical and operational scope of this position.

We are seeking an experienced Private Tutor to provide academic support to students following the American Curriculum (Grades 9–12) or French Curriculum (Primary and Middle School). The ideal candidate should have strong teaching experience within the American or French education system and the ability to support students in subjects such as English Language, English Literature, History, Mathematics, and Science.

• Provide one-to-one tutoring and academic support for high school students.
• Assist students with homework, assignments, projects, and exam preparation.
• Explain concepts clearly and adapt lessons according to students’ learning needs.
• Support students in developing writing, analytical, and critical-thinking skills.
• Monitor academic progress and provide feedback to parents/family when required.
• Develop effective study plans and learning strategies.

Role Details and Requirements

Location: Doha, Qatar. Employment: Full-time.

Advertised requirements:

• Bachelor’s degree in Education or a relevant academic field.
• Proven experience teaching/tutoring high school/ middle school students.
• Strong knowledge of the American/ French High School Curriculum.
• Experience with an American school system or U.S. teaching certification is preferred.
• Strong expertise in English Language, English Literature, and History is highly desirable.
• Excellent spoken and written English communication skills.
• Patient, professional, and able to build positive relationships with students.

How to Apply and Contacts

Open vacancy page

9. IT Project Manager

Job Overview

The IT Project Manager position with Inspire Talent Acquisition in Qatar is part of administration, coordination and management. Its central professional focus is well-organized processes and accountable delivery, alongside effective coordination within the relevant team.

Job Description and Responsibilities

The work combines communication between relevant teams with organized follow-through and careful communication. Day-to-day activities vary with the technical and operational scope of this position.

We are seeking an experienced Technical Delivery Manager to lead and oversee multiple IT projects, ensuring successful delivery within scope, timeline, and quality standards. The ideal candidate will possess strong technical expertise, excellent stakeholder management skills, and experience working with government or public-sector clients in the GCC region.

• Manage and oversee multiple IT projects simultaneously, ensuring timely and successful delivery.
• Coordinate with internal teams, contractors, and stakeholders to achieve project objectives and milestones.
• Monitor project progress, identify risks and challenges, and implement effective mitigation plans.
• Manage client expectations and ensure project requirements are clearly understood and delivered.
• Control project scope and prevent unauthorized changes or scope creep.
• Gather and document business and technical requirements from clients and stakeholders.
• Provide technical guidance to project teams working on .NET, Java, cloud, and enterprise applications.
• Ensure effective communication between clients, project teams, and management.
• Track project performance and prepare regular status reports.
• Support resource planning, task allocation, and team performance management.

Role Details and Requirements

Location: Doha, Qatar. Employment: Full-time.

Advertised requirements:

• Bachelor's Degree in Computer Science, Information Technology, Engineering, or a related field.
• Minimum 10 years of IT experience, including significant experience managing technical projects and teams.
• Strong knowledge of Microsoft Azure cloud services and infrastructure.
• Experience with .NET technologies (.NET Core, C#) and JavaEE applications.
• Good understanding of DevOps practices, CI/CD pipelines, deployment processes, and virtual machine management.
• Experience working with relational and non-relational databases.
• Familiarity with project management and monitoring tools such as Jira and ServiceNow.
• Proven experience working with government entities, municipalities, or utility sectors within the GCC region.
• Excellent leadership, communication, problem-solving, and stakeholder management skills.
• PMP, PRINCE2, Agile, or Scrum certification.
• Experience managing enterprise-scale digital transformation or technology projects.
• Ability to work in a fast-paced environment and manage multiple priorities effectively.
• Information Technology

How to Apply and Contacts

Open vacancy page

10. Intern - Recruitment

Job Overview

The Intern - Recruitment position with Inspire Talent Acquisition in Qatar is part of information technology and systems. Its central professional focus is dependable digital services and accurate technical records, alongside effective coordination within the relevant team.

Job Description and Responsibilities

The work combines analysis of system needs and coordinated support with organized follow-through and careful communication. Day-to-day activities vary with the technical and operational scope of this position.

We are looking for a motivated and results-oriented Recruiter - Intern to join our team. The Recruiter will be responsible for sourcing, screening, and shortlisting qualified candidates based on client requirements and supporting the recruitment process from candidate identification through placement.

• Source candidates through job portals, LinkedIn, databases, social media, and other recruitment channels.
• Review CVs and shortlist candidates based on job requirements.
• Conduct initial candidate screening and interviews.
• Coordinate interviews between candidates and clients.
• Maintain and update candidate databases and recruitment records.
• Prepare and share suitable candidate profiles with clients.
• Follow up with candidates and clients throughout the recruitment process.
• Assist with offer negotiations and joining formalities.
• Build and maintain a strong pipeline of qualified candidates.
• Support local and overseas recruitment activities.
• Ensure candidate information and documentation are accurate and confidential.
• Prepare recruitment reports and provide regular updates on recruitment progress.

Role Details and Requirements

Location: Doha, Qatar. Employment: Full-time.

Advertised requirements:

• Bachelor's degree in Human Resources, Business Administration, or a related field.
• Previous experience in recruitment or talent acquisition is preferred.
• Strong sourcing and candidate screening skills.
• Good knowledge of recruitment platforms and LinkedIn.
• Excellent communication and interpersonal skills.
• Strong organizational and time-management skills.
• Ability to work independently and manage multiple vacancies simultaneously.
• Proficiency in Microsoft Office.
• Target-oriented and proactive approach.
• Human Resources (HR)
• Intern

How to Apply and Contacts

Open vacancy page

11. Electrical Site Engineer

Job Overview

The Electrical Site Engineer position with Inspire Talent Acquisition in Qatar is part of engineering and technical services. Its central professional focus is equipment availability and reliable technical delivery, alongside effective coordination within the relevant team.

Job Description and Responsibilities

The work combines coordination of inspection and operating activities with organized follow-through and careful communication. Day-to-day activities vary with the technical and operational scope of this position.

We are seeking an experienced Electrical Site Engineer to oversee and coordinate electrical installation activities at project sites. The ideal candidate should have strong technical knowledge, site supervision experience, and the ability to ensure that electrical works are completed safely, efficiently, and in accordance with approved drawings, specifications, and project schedules.

• Supervise and coordinate electrical installation works at the project site, ensuring compliance with approved drawings, specifications, and standards.
• Review electrical drawings, BOQs, specifications, and technical documents and coordinate with other disciplines as required.
• Monitor site progress and ensure electrical works are completed according to project schedules and quality requirements.
• Coordinate with contractors, subcontractors, consultants, suppliers, and other site teams to resolve technical and construction-related issues.
• Conduct regular inspections of electrical installations and ensure compliance with project specifications and applicable electrical codes.
• Prepare and maintain daily site reports, inspection requests, progress reports, and other required project documentation.
• Ensure proper installation, testing, and commissioning of electrical systems and equipment.
• Identify site issues, technical discrepancies, and potential delays and coordinate appropriate corrective actions.
• Ensure all electrical works are carried out in accordance with HSE requirements and safety procedures.
• Coordinate with the project team to ensure timely availability of materials, manpower, tools, and equipment.
• Attend site meetings and provide updates on project progress, technical matters, and outstanding works.
• Support testing, commissioning, snagging, and handover activities.

Role Details and Requirements

Location: Doha, Qatar. Employment: Full-time.

Advertised requirements:

• Bachelor’s Degree/Diploma in Electrical Engineering or a related field.
• Minimum 5 years of relevant experience in electrical site engineering and supervision.
• Strong knowledge of electrical installation, testing, commissioning, and troubleshooting.
• Ability to read and interpret electrical drawings, schematics, and technical specifications.
• Experience working on construction, MEP, commercial, residential, or industrial projects.
• Good knowledge of electrical codes, standards, and HSE requirements.
• Strong coordination, communication, problem-solving, and site management skills.
• Proficiency in AutoCAD and MS Office is preferred.
• GCC/Qatar experience is preferred.

How to Apply and Contacts

Open vacancy page

12. Mechanical Supervisor

Job Overview

The Mechanical Supervisor position with Inspire Talent Acquisition in Qatar is part of administration, coordination and management. Its central professional focus is well-organized processes and accountable delivery, alongside effective coordination within the relevant team.

Job Description and Responsibilities

The work combines communication between relevant teams with organized follow-through and careful communication. Day-to-day activities vary with the technical and operational scope of this position.

We are seeking an experienced Mechanical Supervisor with strong practical experience in HVAC, water supply, drainage and plumbing works in the construction industry. The candidate will be responsible for supervising site installation activities, coordinating workers and subcontractors, and ensuring that mechanical works are completed safely, correctly and according to approved drawings and project requirements.

• • Supervise daily mechanical installation activities at the construction site.
• • Lead and coordinate technicians, plumbers, HVAC technicians and subcontractor teams.
• • Supervise installation of HVAC, ductwork, refrigerant/chilled water piping and ventilation systems.
• • Supervise water supply, drainage, soil/waste and plumbing works.
• • Read and interpret approved mechanical/shop drawings and coordinate site installation accordingly.
• • Ensure correct installation, alignment, supports, slopes, pipe routing and workmanship.
• • Coordinate mechanical works with civil, electrical and other MEP activities.
• • Monitor daily manpower, productivity and material requirements.

Role Details and Requirements

Location: Doha, Qatar. Employment: Full-time.

Advertised requirements:

• Diploma in Mechanical Engineering
• Minimum 5 years of relevant experience in Operations & Maintenance of MEP systems and Facilities Management.
• Strong knowledge of HVAC, electrical, plumbing, and fire protection systems.
• Experience supervising maintenance teams in commercial, residential, or institutional facilities.
• Experience in healthcare facilities maintenance will be an added advantage.
• Good communication, leadership, and problem-solving skills.
• Proficiency in Microsoft Office and maintenance management systems.

How to Apply and Contacts

Open vacancy page

13. Electrical Engineer

Job Overview

The Electrical Engineer position with Inspire Talent Acquisition in Qatar is part of engineering and technical services. Its central professional focus is equipment availability and reliable technical delivery, alongside effective coordination within the relevant team.

Job Description and Responsibilities

The work combines coordination of inspection and operating activities with organized follow-through and careful communication. Day-to-day activities vary with the technical and operational scope of this position.

The Electrical Installation Engineer is responsible for planning, executing, supervising, and ensuring the quality and safety of electrical installation works across residential, commercial, or industrial projects. The role ensures all electrical systems are installed in compliance with design specifications, project requirements, and local regulations.

• Supervise and manage electrical installation activities on-site.
• Review electrical drawings, specifications, and project documents.
• Ensure installation of electrical systems such as power distribution, lighting, earthing, and control systems.
• Coordinate with civil, mechanical, and MEP teams for smooth project execution.
• Inspect materials and ensure compliance with approved technical standards.
• Monitor contractor/subcontractor work and ensure adherence to project timelines and quality standards.
• Conduct site inspections and resolve technical installation issues.
• Ensure compliance with electrical codes, safety regulations, and company standards.
• Assist in testing, commissioning, and handover of electrical systems.
• Prepare progress reports, site documentation, and as-built drawings updates.
• Support project planning and material requirement forecasting.
• Ensure all works are carried out safely and in line with HSE requirements.

Role Details and Requirements

Location: Doha, Qatar. Employment: Full-time.

Advertised requirements:

• Bachelor’s degree in Electrical Engineering or related field.
• Minimum 5 years of experience in electrical installation projects (construction, MEP, infrastructure, or industrial).
• Strong knowledge of electrical systems, schematics, and installation standards.
• Familiarity with site execution, testing, and commissioning processes.
• Ability to read and interpret technical drawings and specifications.
• Knowledge of local electrical codes and safety regulations.
• Ability to work under pressure and manage site activities effectively.
• Proficiency in MS Office and basic engineering software (AutoCAD is an advantage).

How to Apply and Contacts

Open vacancy page

14. Dog Trainer

Job Overview

The Dog Trainer position with Inspire Talent Acquisition in Qatar is part of education and training. Its central professional focus is structured learning and consistent learner support, alongside effective coordination within the relevant team.

Job Description and Responsibilities

The work combines planning activities and reviewing learning outcomes with organized follow-through and careful communication. Day-to-day activities vary with the technical and operational scope of this position.

We are seeking a skilled and experienced Dog Trainer to work with dogs of different breeds and temperaments, ensuring proper behavior training and obedience development in a professional and structured manner.

• Train dogs in basic and advanced obedience commands
• Address behavioral issues such as aggression, anxiety, or disobedience
• Develop and implement personalized training programs based on each dog’s needs
• Work on leash training, socialization, and discipline techniques
• Educate pet owners on handling, communication, and reinforcement methods
• Ensure the safety and well-being of all animals during training sessions
• Maintain a clean and safe training environment

Role Details and Requirements

Location: Doha, Qatar. Employment: Full-time.

Advertised requirements:

• At least 3 years of experience as a professional dog trainer
• Strong knowledge of dog behavior and training techniques
• Ability to handle dogs of various sizes and temperaments
• Patient, calm, and confident approach
• Good communication skills to guide pet owners effectively
• Certification in animal training or related field is an advantage
• Veterinary Services

How to Apply and Contacts

Open vacancy page

15. Chocolatier & Pastry Specialist

Job Overview

The Chocolatier & Pastry Specialist position with Inspire Talent Acquisition in Qatar is part of hospitality and operational services. Its central professional focus is consistent service standards and organized delivery, alongside effective coordination within the relevant team.

Job Description and Responsibilities

The work combines coordination of daily service tasks with organized follow-through and careful communication. Day-to-day activities vary with the technical and operational scope of this position.

We are seeking an experienced Chocolatier & Pastry Specialist with strong professional expertise in chocolate making, chocolate desserts, cakes, and cake decoration. The successful candidate will be responsible for preparing high-quality chocolate and pastry products while maintaining excellent standards of taste, presentation, hygiene, and consistency.

• Prepare a variety of professional chocolate products and desserts.
• Create and prepare chocolate-based desserts, fillings, ganaches, pralines, and other chocolate products.
• Prepare and decorate a variety of cakes and pastries.
• Perform professional cake decoration, finishing, and presentation.
• Work with different types of chocolate and apply appropriate tempering and processing techniques.
• Follow recipes, production standards, and quality specifications.
• Develop and execute creative chocolate and cake designs based on requirements.
• Ensure consistency in taste, texture, appearance, and portioning.
• Maintain high standards of food hygiene, sanitation, and kitchen safety.
• Properly store chocolate, pastry ingredients, and finished products.
• Monitor ingredient usage and minimize wastage.
• Maintain cleanliness and organization of the pastry and chocolate production areas.
• Ensure proper handling and maintenance of pastry and chocolate-making equipment.
• Keep up to date with current trends and techniques in chocolate and pastry production.
• Work effectively with the wider kitchen/team to ensure timely production and delivery of orders.

Role Details and Requirements

Location: Doha, Qatar. Employment: Full-time.

Advertised requirements:

• Proven professional experience as a Chocolatier, Pastry Chef, Pastry Specialist, or similar role.
• Strong hands-on experience in professional chocolate making.
• Excellent knowledge of chocolate desserts and chocolate-based products.
• Strong experience in cake preparation and decoration.
• Practical knowledge of chocolate tempering, ganache, fillings, and finishing techniques.
• Strong cake decorating and presentation skills.
• Good knowledge of pastry ingredients, preparation techniques, and food safety standards.
• Hospitality

How to Apply and Contacts

Open vacancy page

16. Civil Project Engineer

Job Overview

The Civil Project Engineer position with Inspire Talent Acquisition in Qatar is part of engineering and technical services. Its central professional focus is equipment availability and reliable technical delivery, alongside effective coordination within the relevant team.

Job Description and Responsibilities

The work combines coordination of inspection and operating activities with organized follow-through and careful communication. Day-to-day activities vary with the technical and operational scope of this position.

The Civil Project Engineer is responsible for planning, coordinating, supervising, and executing civil construction activities at project sites while ensuring compliance with project specifications, quality standards, safety regulations, and project timelines. The role involves managing manpower, materials, subcontractors, and site activities to ensure successful project completion within budget and schedule requirements.

• Project Execution & Site Management
• • Supervise and manage day-to-day civil construction activities on site.
• • Ensure project execution is carried out as per approved drawings, specifications, and project schedules.
• • Coordinate with consultants, clients, subcontractors, and internal teams for smooth project progress.
• • Monitor site activities to ensure work is completed within planned timelines and budgets.
• • Review construction drawings and identify discrepancies or technical issues.
• • Ensure proper allocation of manpower, materials, machinery, and equipment at site.
• Planning & Coordination
• • Prepare work schedules and monitor project progress.
• • Coordinate with procurement and stores departments for timely material delivery.
• • Attend project meetings with clients, consultants, and management teams.
• • Coordinate with MEP and architectural teams to ensure integrated project execution.
• • Assist in the preparation of project reports, progress updates, and work forecasts.
• Quality Control
• • Ensure all works are executed in accordance with approved quality standards and project specifications.
• • Conduct site inspections and monitor workmanship quality.
• • Coordinate inspections with consultants and authorities.
• • Ensure proper testing and documentation of construction activities.
• • Maintain records of site activities, inspections, and approvals.
• Health & Safety
• • Ensure implementation of HSE policies and safety procedures at site.
• • Conduct regular safety inspections and ensure compliance with safety regulations.
• • Monitor safe working practices for workers, subcontractors, and equipment operators.
• • Report unsafe conditions and take corrective actions immediately.
• Commercial & Documentation
• • Verify subcontractor work progress and measurements.
• • Assist in the preparation of quantity take-offs and material estimations.
• • Monitor material consumption and minimize wastage.
• • Prepare site reports, daily progress reports, and technical documentation.
• • Support the preparation of variations, as-built drawings, and project close-out documents.
• Required Qualifications
• • Bachelor's Degree or Diploma in Civil Engineering or a related field.
• • Relevant experience as required by company/project standards.
• • Knowledge of construction methods, materials, and project management practices.
• • Familiarity with local authority regulations and construction standards.
• • Proficiency in AutoCAD, MS Office, and project management software is preferred.
• Key Skills
• • Strong technical and problem-solving skills.
• • Project coordination and site supervision.
• • Leadership and team management abilities.
• • Effective communication and reporting skills.
• • Strong time management and multitasking capabilities.
• • Quality and safety awareness.
• Preferred Industry Experience
• • Building construction projects.
• • Infrastructure projects.
• • Commercial and residential developments.
• • Turnkey construction projects.
• MEP/Construction
• Permanent

Role Details and Requirements

Location: Doha, Qatar. Employment: Full-time.

How to Apply and Contacts

Open vacancy page

17. Fitter

Job Overview

The Fitter position with Inspire Talent Acquisition in Qatar is part of engineering and technical services. Its central professional focus is equipment availability and reliable technical delivery, alongside effective coordination within the relevant team.

Job Description and Responsibilities

The work combines coordination of inspection and operating activities with organized follow-through and careful communication. Day-to-day activities vary with the technical and operational scope of this position.

We are seeking a skilled Fitter with hands-on experience in fitting, fabrication, assembly, and installation of mechanical components, pipes, fittings, and equipment. The ideal candidate should be able to read technical drawings, perform accurate measurements and alignment, and ensure all fitting activities meet project specifications, quality standards, and HSE requirements.

• Carry out fitting, fabrication, assembly, and installation of mechanical components, pipes, fittings, flanges, and related equipment.
• Read and interpret engineering drawings, fabrication drawings, and piping isometric drawings.
• Measure, mark, cut, bevel, and prepare pipes and components for fitting and assembly.
• Perform pipe fit-up, alignment, tack welding preparation, and joint preparation before welding.
• Install and assemble mechanical components, piping systems, supports, and equipment as required.
• Ensure proper dimensions, alignment, clearances, and tolerances according to project specifications.
• Use hand tools, power tools, and measuring instruments safely and accurately.
• Inspect fitted components and rectify alignment or dimensional issues before final installation or welding.
• Coordinate with welders, supervisors, and QA/QC inspectors to ensure work meets quality requirements.
• Follow approved method statements, Permit to Work (PTW) procedures, and site HSE regulations.
• Maintain tools and equipment in good working condition.
• Complete assigned tasks within project schedules while maintaining safety and workmanship standards.

Role Details and Requirements

Location: Doha, Qatar. Employment: Full-time.

Advertised requirements:

• ITI or Diploma in Mechanical Engineering, Fitting, or a related technical field.
• Minimum 3 years of relevant experience as a Fitter in an industrial, mechanical, or piping environment.
• Practical experience in fitting, fabrication, assembly, pipe fit-up, and mechanical installation.
• Ability to read and interpret engineering drawings and piping isometric drawings.
• Knowledge of measuring, cutting, beveling, alignment, and joint preparation.
• Familiarity with mechanical tools, measuring instruments, and industrial safety procedures.
• Experience in oil and gas, petrochemical, power plant, or industrial projects is preferred.
• Ability to work effectively with welders, technicians, supervisors, and other site personnel.
• Facilities Management

How to Apply and Contacts

Open vacancy page

18. Tea cum Snacks Maker

Job Overview

The Tea cum Snacks Maker position with Inspire Talent Acquisition in Qatar is part of the functional area of the named position. Its central professional focus is consistent work quality and organized delivery, alongside effective coordination within the relevant team.

Job Description and Responsibilities

The work combines team coordination and accurate records with organized follow-through and careful communication. Day-to-day activities vary with the technical and operational scope of this position.

We are looking for a reliable and skilled Tea cum Snacks Maker to prepare and serve tea, coffee, and a variety of light snacks while maintaining high standards of cleanliness, hygiene, and food quality. The ideal candidate should be organized, attentive, and able to provide timely service in a professional working environment.

• Prepare and serve tea, coffee, and other beverages according to company requirements.
• Prepare simple snacks, sandwiches, and light refreshments.
• Ensure that all food and beverages are prepared hygienically and presented neatly.
• Serve refreshments to employees, management, clients, and visitors in a polite and professional manner.
• Maintain cleanliness and organization of the pantry, kitchen, serving area, and equipment.
• Wash and properly store cups, plates, utensils, and other kitchen items.
• Monitor pantry supplies and inform the concerned person when stock is running low.
• Check the freshness and quality of food ingredients and beverages.
• Follow food safety, hygiene, and workplace health and safety standards.
• Assist with preparing and serving refreshments during meetings, events, and office functions.
• Dispose of waste properly and maintain a clean and hygienic work environment.
• Perform other related duties as assigned by the management.

Role Details and Requirements

Location: Doha, Qatar. Employment: Full-time.

Advertised requirements:

• Previous experience as a Tea Maker, Pantry Assistant, Tea Boy, Tea Lady, or Snacks Maker is preferred.
• Basic knowledge of preparing tea, coffee, sandwiches, and simple snacks.
• Knowledge of food hygiene and safe food-handling practices.
• Good communication and customer-service skills.
• Ability to work efficiently and manage multiple requests.
• Neat, presentable, reliable, and well organized.
• Ability to follow instructions and maintain confidentiality in a professional environment.
• Candidates currently available in Qatar are preferred.
• Food & Beverage

How to Apply and Contacts

Open vacancy page

19. Chef de Partie

Job Overview

The Chef de Partie position with Inspire Talent Acquisition in Qatar is part of hospitality and operational services. Its central professional focus is consistent service standards and organized delivery, alongside effective coordination within the relevant team.

Job Description and Responsibilities

The work combines coordination of daily service tasks with organized follow-through and careful communication. Day-to-day activities vary with the technical and operational scope of this position.

We are seeking a skilled and dedicated Chef de Partie to manage a designated section of the kitchen and ensure the consistent preparation and presentation of high-quality dishes. The ideal candidate will support daily kitchen operations while maintaining food safety, hygiene, and quality standards.

• • Prepare and present dishes according to established recipes and standards.
• • Manage and supervise Commis Chefs and junior kitchen staff within the assigned section.
• • Ensure food quality, portion control, and consistency during service.
• • Maintain cleanliness, hygiene, and food safety standards in the work area.
• • Monitor stock levels and assist with inventory control and requisitions.
• • Minimize food wastage and support cost-control initiatives.
• • Coordinate with other kitchen sections to ensure smooth operations.
• • Assist in training and developing junior team members.

Role Details and Requirements

Location: Doha, Qatar. Employment: Full-time.

Advertised requirements:

• • Diploma or Certificate in Culinary Arts or a related field preferred.
• • Minimum 3 years of experience in a similar role within a hotel or restaurant environment.
• • Strong knowledge of food preparation techniques and kitchen operations.
• • Good understanding of HACCP and food safety standards.
• • Ability to work efficiently in a fast-paced environment.
• • Strong teamwork, communication, and organizational skills.
• • Experience in 4-star or 5-star hotels.
• • Multi-cuisine experience is an advantage.
• Culinary

How to Apply and Contacts

Open vacancy page

20. Childcare Provider

Job Overview

The Childcare Provider position with Inspire Talent Acquisition in Qatar is part of the functional area of the named position. Its central professional focus is consistent work quality and organized delivery, alongside effective coordination within the relevant team.

Job Description and Responsibilities

The work combines team coordination and accurate records with organized follow-through and careful communication. Day-to-day activities vary with the technical and operational scope of this position.

We are looking for a caring, responsible, and trustworthy Childcare Provider to provide attentive childcare and support children’s daily routines in a safe and nurturing environment.

• Supervise and care for children throughout the day
• Prepare meals and snacks for children as instructed
• Assist with bathing, dressing, and hygiene routines
• Plan and engage children in educational and recreational activities
• Maintain children’s schedules, including meals, naps, and bedtime routines
• Ensure children’s rooms, toys, and play areas are clean and organized
• Monitor children’s safety and well-being at all times
• Assist with school drop-offs/pick-ups or accompany children to activities if required
• Support children’s emotional, social, and behavioral development
• Follow household rules and parents’ instructions carefully

Role Details and Requirements

Location: Doha, Qatar. Employment: Full-time.

Advertised requirements:

• At least 3 years of experience as a nanny, babysitter, or childcare provider
• Good understanding of child safety and basic childcare practices
• Patient, caring, and responsible personality
• Ability to multitask and manage daily routines efficiently
• Good communication and interpersonal skills
• Reliable, disciplined, and trustworthy
• Physically fit and energetic to keep up with children’s activities
• Housekeeping

How to Apply and Contacts

Open vacancy page

21. Stainless Steel (SS) Welder

Job Overview

The Stainless Steel (SS) Welder position with Inspire Talent Acquisition in Qatar is part of engineering and technical services. Its central professional focus is equipment availability and reliable technical delivery, alongside effective coordination within the relevant team.

Job Description and Responsibilities

The work combines coordination of inspection and operating activities with organized follow-through and careful communication. Day-to-day activities vary with the technical and operational scope of this position.

We are seeking a skilled Stainless Steel (SS) Welder with hands-on experience in TIG (GTAW) welding and stainless steel fabrication. The successful candidate will be responsible for welding stainless steel pipes, fittings, plates, structures, and equipment while ensuring compliance with approved welding procedures, project specifications, quality standards, and HSE requirements.

• Perform stainless steel welding using TIG (GTAW) and other applicable welding processes as required.
• Weld stainless steel pipes, fittings, plates, structures, and equipment according to project specifications.
• Read and interpret engineering drawings, welding symbols, and piping isometric drawings.
• Prepare materials, joints, and welding equipment before commencing work.
• Follow approved Welding Procedure Specifications (WPS) and applicable welding standards.
• Ensure proper weld quality and minimize defects such as porosity, cracks, undercut, and incomplete fusion.
• Perform visual inspections and rectify welding defects as instructed.
• Maintain welding machines, tools, and equipment in good working condition.
• Follow approved quality procedures, safety regulations, and site HSE requirements.
• Coordinate with supervisors, fitters, and QA/QC inspectors to complete assigned work on schedule.

Role Details and Requirements

Location: Doha, Qatar. Employment: Full-time.

Advertised requirements:

• ITI or Diploma in Welding Technology, Mechanical Engineering, or a related technical field.
• Minimum 3 years of relevant experience in stainless steel welding.
• Hands-on experience in TIG (GTAW) welding of stainless steel is mandatory.
• Ability to read and interpret engineering drawings and welding symbols.
• Knowledge of weld preparation, finishing, inspection, and defect rectification.
• Familiarity with welding procedures, quality standards, and industrial safety practices.
• Experience in oil and gas, petrochemical, or industrial projects is preferred.
• Facilities Management

How to Apply and Contacts

Open vacancy page

22. Cloud/DevOps Engineer

Job Overview

The Cloud/DevOps Engineer position with Inspire Talent Acquisition in Qatar is part of engineering and technical services. Its central professional focus is equipment availability and reliable technical delivery, alongside effective coordination within the relevant team.

Job Description and Responsibilities

The work combines coordination of inspection and operating activities with organized follow-through and careful communication. Day-to-day activities vary with the technical and operational scope of this position.

We are seeking a highly skilled Cloud/DevOps Engineer to design, implement, automate, and operate secure, scalable, and reliable cloud environments and DevOps platforms. The role will focus on cloud infrastructure, Infrastructure as Code (IaC), CI/CD, containerization, monitoring, automation, and operational reliability. The ideal candidate will work closely with Development, Infrastructure, Application Support, and Security teams to accelerate software delivery while maintaining strong standards for availability, security, performance, and operational governance.

• 1. Cloud Infrastructure & Platform Management:
• Design, deploy, and manage cloud infrastructure across Azure and/or Google Cloud environments.
• Provision and maintain compute, storage, networking, IAM, and other cloud platform services.
• Lead cloud migration, modernization, scalability, and cost-optimization initiatives.
• Implement secure and highly available cloud architecture aligned with business and application requirements.
• 2. Infrastructure as Code & Automation:
• Develop and maintain Infrastructure as Code using Terraform, Ansible, or equivalent tools
• Automate infrastructure provisioning, configuration, deployment, patching, and operational tasks
• Develop reusable automation modules, scripts, templates, and runbooks
• Promote an automation-first approach to reduce manual effort, configuration drift, and operational errors
• 3. CI/CD & Release Engineering:
• Design, implement, and maintain CI/CD pipelines for application build, test, security scanning, and deployment
• Manage deployment workflows across development, testing, staging, and production environments
• Implement deployment strategies such as rolling, blue/green, or canary releases where appropriate
• Integrate source control, automated testing, artifact management, and release controls into delivery pipelines
• 4. Containerization & Modern Platforms:
• Build, deploy, and manage Docker-based application environments
• Deploy and administer Kubernetes clusters and supporting services
• Implement container orchestration, scaling, configuration, secrets, and service connectivity
• Support application teams in adopting cloud-native and container-based deployment practices
• 5. Monitoring, Logging & Observability:
• Implement monitoring, logging, alerting, and observability using Azure Monitor, CloudWatch, Prometheus, Grafana, ELK, or equivalent tools
• Proactively monitor availability, performance, capacity, and resource utilization
• Develop dashboards, alerts, and operational metrics to support proactive incident management
• Participate in incident response, troubleshooting, problem management, and root cause analysis
• 6. Security, Resilience & Governance:
• Apply cloud security best practices including IAM, least privilege, MFA, secrets management, network segmentation, and secure configuration
• Integrate security controls and automated checks into CI/CD pipelines
• Implement and test backup, disaster recovery, business continuity, and recovery procedures for cloud workloads
• Support compliance with applicable security and operational standards, policies, and controls
• 7. Collaboration & Documentation:
• Work closely with Development, Infrastructure, Application Support, and Security teams
• Support application teams with deployment architecture, environment configuration, troubleshooting, and performance optimization
• Maintain clear architecture diagrams, configuration documentation, automation scripts, deployment procedures, and runbooks
• Contribute to continuous improvement of DevOps processes, standards, and operational practices
• Required Qualifications:
• Minimum of bachelor’s degree in computer science, IT, engineering, or related field.
• 5+ years of experience in cloud engineering, DevOps, systems administration, software deployment, or related infrastructure roles.
• Hands-on experience managing production cloud environments and implementing CI/CD and automation practices.
• Hands-on experience with Azure and/or Google Cloud, including compute, storage, networking, IAM, and cloud-native services.
• Strong experience with Terraform, Ansible, CloudFormation, or equivalent IaC technologies.
• Experience with Azure DevOps, GitHub Actions, GitLab CI, Jenkins, or equivalent platforms.
• Practical experience with Docker and Kubernetes.
• Strong scripting skills using PowerShell, Bash, Python, or similar languages.
• Experience with Git and platforms such as Azure Repos, GitHub, or GitLab.
• Experience with Prometheus, Grafana, Azure Monitor, CloudWatch, ELK Stack, or equivalent tools.
• Good working knowledge of Linux and Windows Server environments.
• Understanding of TCP/IP, DNS, HTTP/HTTPS, VPNs, load balancing, firewalls, and cloud networking concepts.
• Understanding of IAM, secrets management, vulnerability management, secure configuration, and DevSecOps principles.
• Ability to monitor and optimize cloud resource utilization and expenditure.
• Familiarity with infrastructure and network monitoring tools and IT service management (ITSM) platforms.

Role Details and Requirements

Location: Doha, Qatar. Employment: Full-time.

How to Apply and Contacts

Open vacancy page

23. Mechanical Engineer

Job Overview

The Mechanical Engineer position with Inspire Talent Acquisition in Qatar is part of engineering and technical services. Its central professional focus is equipment availability and reliable technical delivery, alongside effective coordination within the relevant team.

Job Description and Responsibilities

The work combines coordination of inspection and operating activities with organized follow-through and careful communication. Day-to-day activities vary with the technical and operational scope of this position.

We are seeking a qualified Mechanical Engineer to oversee the operation, maintenance, and optimization of MEP systems within facilities. The successful candidate will be responsible for ensuring the efficient performance, reliability, and compliance of all mechanical and electrical systems while supporting daily facilities management operations.

• Supervise the operation and maintenance of MEP systems, including HVAC, plumbing, fire protection, and electrical systems.
• Ensure preventive and corrective maintenance activities are carried out efficiently and in accordance with established standards.
• Monitor system performance and recommend improvements to enhance operational efficiency and reliability.
• Coordinate with maintenance teams, contractors, and vendors to ensure timely completion of maintenance activities.
• Conduct inspections and audits of facilities and MEP systems to ensure compliance with safety and regulatory requirements.
• Prepare maintenance reports, technical documentation, and performance records.
• Troubleshoot and resolve technical issues related to mechanical and electrical systems.
• Support budgeting, planning, and resource allocation for maintenance activities.
• Ensure adherence to health, safety, and environmental policies and procedures.

Role Details and Requirements

Location: Doha, Qatar. Employment: Full-time.

Advertised requirements:

• Bachelor's Degree in Mechanical Engineering or Electrical Engineering.
• Valid UPDA Certification is mandatory.
• Minimum 5 years of relevant experience in Operations & Maintenance of MEP systems and Facilities Management.
• Strong knowledge of HVAC, electrical, plumbing, and fire protection systems.
• Experience in healthcare facilities maintenance will be a distinct advantage.
• Excellent problem-solving, communication, and coordination skills.
• Proficiency in maintenance management systems and Microsoft Office applications.

How to Apply and Contacts

Open vacancy page

24. Sales Engineer (MEP & Interior Fit Out)

Job Overview

The Sales Engineer (MEP & Interior Fit Out) position with Inspire Talent Acquisition in Qatar is part of engineering and technical services. Its central professional focus is equipment availability and reliable technical delivery, alongside effective coordination within the relevant team.

Job Description and Responsibilities

The work combines coordination of inspection and operating activities with organized follow-through and careful communication. Day-to-day activities vary with the technical and operational scope of this position.

We are seeking an experienced and results-driven Sales Engineer specializing in MEP and Interior Fit-Out solutions. The successful candidate will be responsible for developing business opportunities, managing client relationships, and driving sales growth within the MEP and construction sectors. This role requires strong technical knowledge of MEP systems, interior fit-out solutions, and the ability to provide customized solutions that align with client requirements, project specifications, and budgets.

• Develop and maintain strong relationships with contractors, consultants, architects, project managers, and end clients.
• Identify and pursue new business opportunities within the MEP and interior fit-out sectors.
• Promote MEP systems and interior fit-out solutions to potential clients.
• Provide technical consultations and recommend suitable solutions based on project requirements.
• Prepare quotations, cost estimates, commercial proposals, and sales presentations.
• Conduct client meetings, site visits, product demonstrations, and technical discussions.
• Review project drawings, specifications, and client requirements to develop appropriate solutions.
• Coordinate with internal teams to ensure smooth project execution and timely delivery.
• Monitor project opportunities, sales pipelines, and market trends to achieve sales targets.
• Support contract negotiations and maintain long-term customer relationships.

Role Details and Requirements

Location: Doha, Qatar. Employment: Full-time.

Advertised requirements:

• Bachelor's degree in Mechanical, Electrical, Civil Engineering, or a related field.
• Minimum 5–10 years of sales experience in Qatar within the MEP and/or interior fit-out industry.
• Strong technical knowledge of MEP systems, including HVAC, electrical, plumbing, and related services.
• Experience in interior fit-out products, solutions, and construction projects.
• Ability to understand engineering drawings, project specifications, and technical requirements.
• Excellent communication, negotiation, and customer relationship management skills.
• Strong business development and sales performance track record.
• Ability to work independently and manage multiple client requirements effectively.

How to Apply and Contacts

Open vacancy page

25. HVAC technician

Job Overview

The HVAC technician position with Inspire Talent Acquisition in Qatar is part of engineering and technical services. Its central professional focus is equipment availability and reliable technical delivery, alongside effective coordination within the relevant team.

Job Description and Responsibilities

The work combines coordination of inspection and operating activities with organized follow-through and careful communication. Day-to-day activities vary with the technical and operational scope of this position.

We are seeking a skilled A/C Technician to carry out the operation, maintenance, troubleshooting, and repair of HVAC systems within facilities. The successful candidate will be responsible for ensuring the efficient and reliable performance of air conditioning, ventilation, and refrigeration systems while maintaining a comfortable and safe environment for facility occupants.

• Perform preventive and corrective maintenance of HVAC systems, including air handling units (AHUs), fan coil units (FCUs), chillers, split units, package units, and ventilation systems.
• Diagnose and repair faults in air conditioning and refrigeration equipment.
• Monitor HVAC system performance and recommend corrective actions to improve efficiency and reliability.
• Conduct routine inspections, testing, and servicing of HVAC equipment.
• Attend to breakdowns and emergency maintenance requests promptly.
• Ensure proper operation of temperature control systems, thermostats, and associated HVAC controls.
• Maintain maintenance records, service reports, and equipment logs.
• Coordinate with supervisors and other maintenance personnel to ensure uninterrupted facility operations.
• Adhere to health, safety, and environmental regulations at all times.

Role Details and Requirements

Location: Doha, Qatar. Employment: Full-time.

Advertised requirements:

• ITI Certificate or Diploma in Refrigeration & Air Conditioning, Mechanical Engineering, or a related discipline.
• Minimum 5 years of relevant experience in Operations & Maintenance of MEP systems and Facilities Management.
• Strong knowledge of HVAC systems, refrigeration cycles, air distribution systems, and troubleshooting techniques.
• Ability to read and interpret HVAC drawings, schematics, and technical manuals.
• Experience in healthcare facilities maintenance will be an added advantage.
• Good communication and teamwork skills.
• Experience working with chillers, AHUs, FCUs, VRF/VRV systems, and BMS-controlled HVAC systems.
• Strong fault-finding and problem-solving abilities.
• Knowledge of preventive maintenance practices and HVAC safety standards.
• Ability to work independently and respond effectively to emergency maintenance situations.

How to Apply and Contacts

Open vacancy page

26. Sales Executive (Hydraulics / Heavy Equipment)

Job Overview

The Sales Executive (Hydraulics / Heavy Equipment) position with Inspire Talent Acquisition in Qatar is part of administration, coordination and management. Its central professional focus is well-organized processes and accountable delivery, alongside effective coordination within the relevant team.

Job Description and Responsibilities

The work combines communication between relevant teams with organized follow-through and careful communication. Day-to-day activities vary with the technical and operational scope of this position.

We are seeking a dynamic and experienced Sales Executive (Hydraulic Sales) to join our team for Saudi Arabia operations. The candidate will be responsible for developing sales, maintaining client relationships, and promoting hydraulic products and industrial equipment to customers in the construction, manufacturing, and heavy equipment sectors.

• • Develop and maintain strong relationships with clients and industrial customers.
• • Promote and sell hydraulic products, heavy equipment parts, pumps, valves, hoses, and related industrial solutions.
• • Identify new business opportunities and achieve sales targets.
• • Prepare quotations, follow up on inquiries, and negotiate contracts.
• • Provide technical support and product information to customers.
• • Coordinate with internal teams for order processing and delivery.
• • Conduct market research and monitor competitor activities.
• • Maintain sales reports, client records, and market updates.
• Requirements & Skills
• • Bachelor's Degree or Diploma in Mechanical Engineering or an equivalent qualification.
• • 3 to 5 years of experience in hydraulic or industrial equipment sales.
• • Strong knowledge of hydraulic systems, components, and industrial applications.
• • Experience in B2B sales and client relationship management.
• • Excellent communication, negotiation, and presentation skills.
• • Ability to achieve sales targets and work independently.
• • Proficiency in MS Office and sales reporting tools.

Role Details and Requirements

Location: Doha, Qatar. Employment: Full-time.

Advertised requirements:

• • Prior Gulf or Saudi Arabia market experience is preferred.
• • Experience in construction equipment, heavy machinery, or industrial products sales.
• Job Location- Saudi
• Sales and Marketing
• Permanent

How to Apply and Contacts

Open vacancy page

27. Commis 1

Job Overview

The Commis 1 position with Inspire Talent Acquisition in Qatar is part of the functional area of the named position. Its central professional focus is consistent work quality and organized delivery, alongside effective coordination within the relevant team.

Job Description and Responsibilities

The work combines team coordination and accurate records with organized follow-through and careful communication. Day-to-day activities vary with the technical and operational scope of this position.

We are seeking a motivated and passionate Commis I to support the kitchen team in the preparation and presentation of high-quality food. The successful candidate will assist senior chefs in daily kitchen operations while maintaining food safety, hygiene, and quality standards.

• • Assist in the preparation, cooking, and presentation of food items according to recipes and standards.
• • Ensure proper food handling, storage, and labeling procedures.
• • Maintain cleanliness and organization of the assigned work area.
• • Support senior chefs during food preparation and service.
• • Monitor stock levels and report shortages to supervisors.
• • Follow all food safety, hygiene, and HACCP standards.
• • Assist in minimizing food wastage and maintaining portion control.
• • Ensure kitchen equipment is used and maintained properly.

Role Details and Requirements

Location: Doha, Qatar. Employment: Full-time.

Advertised requirements:

• • Diploma or Certificate in Culinary Arts or a related field preferred.
• • Minimum 2 years of experience in a luxury hotel
• • Basic knowledge of food preparation techniques and kitchen operations.
• • Understanding of food safety and hygiene standards.
• • Ability to work in a fast-paced environment and as part of a team.
• • Good communication and organizational skills.
• • Experience in a 4-star or 5-star hotel environment.
• • Exposure to international or multi-cuisine kitchens is an advantage.
• Culinary

How to Apply and Contacts

Open vacancy page

28. IT Specialist

Job Overview

The IT Specialist position with Inspire Talent Acquisition in Qatar is part of information technology and systems. Its central professional focus is dependable digital services and accurate technical records, alongside effective coordination within the relevant team.

Job Description and Responsibilities

The work combines analysis of system needs and coordinated support with organized follow-through and careful communication. Day-to-day activities vary with the technical and operational scope of this position.

The IT Supervisor plays a key role in managing the day-to-day operations of the IT department, ensuring the smooth functioning of Technology Systems and Infrastructure for the Club’s requirements. This role involves providing Technical support, implementing IT policies and Procedures, and Collaborating with other Departments to meet the Club's Technology needs. The IT Supervisor also contributes to strategic planning, project management and technology initiatives to enhance productivity, efficiency and innovation.Your duties and responsibilities include, but not limited, to the following;

• 1. Responsible in the line Management of other IT Technicians within the club.
• 2. Provide general Technical support related to IT matters, but not limited to:
• Network and Applications Management
• Computer Systems Management
• Monitoring the condition of Network Resources and reporting any damage or problems to the Management.
• Ensuring systems backup procedures are followed regularly.
• Ensuring latest anti-virus is running successfully.
• Ensuring the Smooth Operation of the Wireless Network.
• Ensuring the smooth running of club's applications.
• 3. Maintaining, installing and supporting the use of Computer equipment and peripherals for Administrative
• use within the club.
• 4. Monitor and keep a log of all breakdowns and alterations to the Club’s systems
• 5. Advise on the technical aspects of the club’s IT development and Hardware / Software purchases.
• 6. Checking the Operations of the Club’s IT systems and reporting any equipment is in need of repair or upgrade.
• 7. Maintain an accurate record of Software licenses and report infringement to the Management.
• 8. Maintain a detailed stock record of Club’s IT Hardware and Peripherals.
• 9. Liaise with IT equipment suppliers and vendors in the event of technical issues which require IT specialist support.
• 10. Provide Security to Club’s logical and physical IT infrastructure.
• Qualifications Required
• 1. Bachelors Degree in Computer Science or a related field.
• 2. Strong Technical Skills in Network Administration, System Administration, Database Management, Hardware & Software trouble shooting.
• 3. Experience required: Minimum 3 years experience in Hospitality Sector.
• Information Technology

Role Details and Requirements

Location: Doha, Qatar. Employment: Full-time.

How to Apply and Contacts

Open vacancy page

29. Senior Electrical Testing Engineer

Job Overview

The Senior Electrical Testing Engineer position with Inspire Talent Acquisition in Qatar is part of engineering and technical services. Its central professional focus is equipment availability and reliable technical delivery, alongside effective coordination within the relevant team.

Job Description and Responsibilities

The work combines coordination of inspection and operating activities with organized follow-through and careful communication. Day-to-day activities vary with the technical and operational scope of this position.

We are seeking an experienced Senior Electrical Testing Engineer with 5–10 years of hands-on experience in LV/MV electrical testing and commissioning. The successful candidate will lead site testing activities, supervise technical teams, ensure compliance with relevant standards, and coordinate with clients and project stakeholders to deliver projects safely and efficiently.

Key Technical Experience

1. Power Transformers

Conduct insulation resistance (IR) and polarization index (PI) tests.

Perform winding resistance, transformer turns ratio (TTR), and vector group tests.

Carry out on-load tap changer (OLTC) checks and functional testing.

Experience with sweep frequency response analysis (SFRA) is preferred.

Coordinate transformer oil testing and dissolved gas analysis (DGA).

2. HV/MV Cables and Accessories

Perform insulation resistance (IR), polarization index (PI), continuity, and sheath tests.

Conduct VLF and Hi-Pot testing, as applicable.

Test cable joints and terminations.

3. MV/LV Switchgear and Panels

Perform insulation resistance and contact resistance tests.

Conduct functional testing, interlock verification, and basic commissioning activities.

4. Protection and Control Systems

Support protection relay testing using secondary injection test kits.

Verify control wiring and perform interface checks, as applicable.

5. Standards, Documentation and Safety

Strong understanding of relevant IEC/IEEE standards.

Prepare accurate test reports and maintain testing documentation.

Follow site safety procedures, including Permit to Work (PTW) and Lockout/Tagout (LOTO).

• Lead and execute on-site electrical testing and commissioning activities.
• Prepare and review clear, professional test reports and technical documentation.
• Supervise engineers and technicians, allocate resources, and manage testing schedules.
• Ensure quality, safety, and compliance with project specifications and applicable standards.
• Coordinate with clients, EPC contractors, OEMs, and other stakeholders to meet project deadlines.
• Participate in client meetings and provide technical inputs for proposals and service development.
• Support business development activities to expand electrical testing and commissioning services.
• Mandatory Requirements
• Bachelor’s Degree or Diploma in Electrical Engineering.
• 5–10 years of relevant hands-on experience in LV/MV electrical testing and commissioning.
• Valid QatarEnergy or KAHRAMAA approval is mandatory.
• Strong technical reporting, team leadership, coordination, and communication skills.
• Knowledge of electrical testing standards and site safety requirements.

Role Details and Requirements

Location: Doha, Qatar. Employment: Full-time.

How to Apply and Contacts

Open vacancy page

30. Quantity Surveyor

Job Overview

The Quantity Surveyor position with Inspire Talent Acquisition in Qatar is part of engineering estimation and project planning. Its central professional focus is the accuracy of technical submissions and commercial estimates, alongside effective coordination within the relevant team.

Job Description and Responsibilities

The work combines coordination of technical documents and project inputs with organized follow-through and careful communication. Day-to-day activities vary with the technical and operational scope of this position.

We are seeking a skilled and experienced Quantity Surveyor to manage project/site quantity surveying and cost control activities, ensuring accurate cost monitoring, commercial management, and effective contract administration throughout project execution.

• Manage quantity surveying and cost control activities for ongoing projects.
• Monitor project costs, budgets, variations, and overall financial progress.
• Prepare and review BOQs, measurements, valuations, and payment certificates.
• Conduct quantity take-offs and verify project quantities.
• Assist with contract administration and project-related commercial matters.
• Monitor subcontractor work progress and review related measurements and valuations.
• Coordinate with project/site teams, subcontractors, and management on commercial matters.
• Track project variations, claims, and cost implications.
• Prepare cost reports and provide regular updates on project financial performance.
• Ensure accurate documentation and records of project costs and commercial activities.
• Utilize ERP systems for project cost monitoring and related commercial activities.

Role Details and Requirements

Location: Doha, Qatar. Employment: Full-time.

Advertised requirements:

• Bachelor’s Degree or Diploma in Quantity Surveying, Civil Engineering, or a related field.
• Minimum 8–10 years of experience in Project/Site Quantity Surveying and Cost Control.
• Minimum 5 years of hands-on Project/Site QS experience.
• Minimum 5 years of Cost Control experience.
• Minimum 2 years of experience with a Grade A or major contracting company.
• Candidates with primarily Estimation/Tendering QS experience will not be considered.
• Consultancy experience will not be considered.
• Strong knowledge of quantity surveying, cost control, contracts, and project commercial activities.
• Experience working with ERP systems.
• Valid driving license.
• Strong skills in BOQ preparation, measurements, valuations, variations, and payment certificates.
• Excellent communication, coordination, analytical, and problem-solving skills.
• Commercial

How to Apply and Contacts

Open vacancy page

31. Head Chef

Job Overview

The Head Chef position with Inspire Talent Acquisition in Qatar is part of hospitality and operational services. Its central professional focus is consistent service standards and organized delivery, alongside effective coordination within the relevant team.

Job Description and Responsibilities

The work combines coordination of daily service tasks with organized follow-through and careful communication. Day-to-day activities vary with the technical and operational scope of this position.

We are seeking an experienced and creative Head Chef to leads all kitchen operations, ensuring high-quality food, consistency, and efficiency. Responsible for menu creation, food preparation, and kitchen staff management while maintaining hygiene, safety, and cost control standards.

• •Design and execute menus with consistent quality
• •Lead, train, and supervise kitchen staff
• •Manage food inventory, costs, and supplier orders
• •Ensure compliance with health and safety regulations
• •Maintain kitchen cleanliness and efficiency
• Requirements & Skills
• •Minimum 5 years’ experience as a Head Chef or Senior Chef in a multi-cuisine restaurant or hotel
• •Strong knowledge of Indian cuisine
• •Leadership and team management skills
• •Ability to work under pressure in a fast-paced environment
• •Good understanding of food costing and kitchen budgeting
• •Knowledge of food safety and hygiene regulations
• •Creative, detail-oriented, and quality focused
• Culinary
• Permanent

Role Details and Requirements

Location: Doha, Qatar. Employment: Full-time.

How to Apply and Contacts

Open vacancy page

32. Bolt Torquing Technician

Job Overview

The Bolt Torquing Technician position with Inspire Talent Acquisition in Qatar is part of engineering and technical services. Its central professional focus is equipment availability and reliable technical delivery, alongside effective coordination within the relevant team.

Job Description and Responsibilities

The work combines coordination of inspection and operating activities with organized follow-through and careful communication. Day-to-day activities vary with the technical and operational scope of this position.

We are seeking a skilled Bolt Torquing Technician with hands-on experience in hydraulic torque wrenching, bolt tensioning, flange facing, and cold cutting operations. The successful candidate will be responsible for ensuring accurate bolt tightening, joint integrity, and precision machining in accordance with approved procedures, project specifications, and client HSE requirements.

• Execute hydraulic torque wrenching and bolt tensioning on flanges, valves, vessels, and static and rotating equipment.
• Follow approved tightening procedures, bolt-tightening sequences, torque values, and joint integrity requirements.
• Maintain accurate torque/tension records, job reports, and equipment inspection documentation.
• Perform in-situ flange facing and cold cutting operations, including pipe cutting and beveling, to meet specified tolerances and surface-finish requirements.
• Set up, operate, inspect, and maintain hydraulic pumps, hoses, gauges, torque wrenches, tensioning tools, and portable machining equipment.
• Ensure tools and equipment are properly calibrated, inspected, and fit for use.
• Identify equipment defects, operational issues, and flange or bolting irregularities, and report them to the supervisor.
• Follow Permit to Work (PTW), Job Safety Analysis (JSA), Lockout/Tagout (LOTO), and all applicable client HSE procedures.
• Coordinate with supervisors, QA/QC personnel, and other site teams during shutdowns, turnarounds, maintenance, and commissioning activities.
• Ensure all work is completed safely, accurately, and within the project schedule.

Role Details and Requirements

Location: Doha, Qatar. Employment: Full-time.

Advertised requirements:

• ITI or Diploma in Mechanical Engineering or a related technical discipline.
• Minimum 3 years of relevant hands-on experience in bolt torquing, hydraulic bolt tensioning, and mechanical joint integrity activities.
• Practical experience with hydraulic torque wrenches, bolt tensioners, and associated equipment.
• Experience in flange facing, cold cutting, pipe cutting, and beveling is required.
• Knowledge of torque specifications, tightening sequences, flange joint integrity, and equipment calibration requirements.
• Familiarity with PTW, JSA, LOTO, and industrial HSE procedures.
• Experience working in oil and gas, petrochemical, power plant, or other industrial environments is preferred.
• Ability to read and follow technical drawings, work instructions, and method statements.
• Willingness to work at industrial sites and during shutdowns or turnarounds.
• Facilities Management

How to Apply and Contacts

Open vacancy page

33. Senior Structural Engineer

Job Overview

The Senior Structural Engineer position with Inspire Talent Acquisition in Qatar is part of engineering and technical services. Its central professional focus is equipment availability and reliable technical delivery, alongside effective coordination within the relevant team.

Job Description and Responsibilities

The work combines coordination of inspection and operating activities with organized follow-through and careful communication. Day-to-day activities vary with the technical and operational scope of this position.

We are seeking a highly skilled Senior Structural Engineer with a minimum of 8 years of relevant experience in structural engineering, architectural coordination, and site construction.

The ideal candidate will have proven experience in high-end residential villas, commercial buildings, and/or high-rise projects, with strong technical expertise and hands-on site experience from design coordination through project completion.

• Review and coordinate structural and architectural drawings, specifications, and construction details.
• Conduct site inspections and ensure compliance with approved drawings, quality standards, Qatar regulations, and relevant engineering codes.
• Review shop drawings, material submittals, method statements, RFIs, and technical documentation.
• Resolve site-related technical issues and coordinate with consultants, contractors, architects, and MEP teams.
• Monitor construction quality, workmanship, progress, and structural and architectural coordination.
• Provide technical guidance and prepare inspection reports and project documentation.

Role Details and Requirements

Location: Doha, Qatar. Employment: Full-time.

Advertised requirements:

• Bachelor's degree in Structural Engineering.
• Minimum 8 years of relevant experience; 10+ years preferred.
• Strong hands-on site and construction experience.
• Experience in residential villas, commercial buildings, and/or high-rise projects.
• Proficiency in AutoCAD; Revit and structural design software are an advantage.
• Good knowledge of Qatar construction regulations and international engineering standards.
• Valid Qatar ID (QID) and UPDA/MMUP certification are mandatory.
• Fluency in both English and Arabic is required.
• Valid Qatar driving licence is preferred.
• Permanent

How to Apply and Contacts

Open vacancy page